JMK042BJ223 [TAIYO YUDEN]
Please read this notice before using the TAIYO YUDEN products.; 使用本公司产品前,请仔细阅读本公告。型号: | JMK042BJ223 |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | Please read this notice before using the TAIYO YUDEN products. |
文件: | 总61页 (文件大小:1787K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
notice_e-01
HIGH VALUE MULTILAYER CERAMIC CAPACITORS(HIGH DIELECTRIC TYPE)
WAVE
REFLOW
■ FEATURES
■ APPLICATIONS
◦ꢀImproved higher density mounting(. 042 to 105 type)
◦ꢀMonolithic structure provides higher reliability.
◦Cꢀ ommunication equipment
(cellular phone, wireless applications, etc.)
◦Gꢀ eneral digital circuit
◦ꢀA wide range of capacitance values available in standard case sizes.
◦Pꢀ ower supply bypass capacitors
Liquid crystal modules
Liquid crystal drive voltage lines
LSI, IC, converters(both for input and output)
◦ꢀThe use of nickel as electrode material and plating processing im-
prove the solderability and heat resistance characteristics. It also
prevents migration and raises the level of reliability.
◦ꢀLow equivalent series resistance(ESR) provides superior noise ab-
◦Sꢀ moothing capacitors
DC-DC converters (for both input and output)
Switching power supplies (secondary side)
sorption characteristics.
◦ꢀCompared to tantalum or aluminum electrolytic capacitors, multilayer
ceramic capacitors offer a number of superior features, including:
Higher permissible ripple current values
Smaller case sizes with high rated voltage
Improved reliability due to higher insulation resistance and breakdown voltage.
■ PART NUMBER
J M K 3 1 6 △ B J 1 0 6 M L - T △
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬
❶Rated
❹
Dimension
❻
Temperature
❼
Nominal
❽Capacitance
❾
❿Special
⓬Internal code
Standard
△=Blank space
❷Series name
M
voltage
〔VDC〕
characteristics code
capacitanc
〔e
pF〕
tolerance
Thickness
code
Type (inch) L×W[mm]
042 (01005) 0.4×0.2
063 (0201) 0.6×0.3
105 (0402) 1.0×0.5
107 (0603) 1.6×0.8
212 (0805) 2.0×1.25
316 (1206) 3.2×1.6
325 (1210) 3.2×2.5
△
〔mm〕
B
BJ
example
K
±10%
±20%
-
Standard
C
0.2
A
4
X5R
473
47,000
M
❸End
termination
P
0.3
J
6.3
10
16
25
35
50
B7
X7R
F
105 1,000,000
+80
⓫Packaging
φ178mm Taping
(2mm pitch)
Z
%
-20
V
0.5
L
K
Plated
△F
F
K
A
D
G
L
0.45
0.8
E
T
Y5V
△=Blank space
φ178mm Taping
0.85
1.25
1.6
G
U
W (1mm pitch, 042
Type)
φ178mm Taping
❺
Dimension tolerance[mm]
T
(4mm pitch)
N
Y
M
1.9
All types
Code Type
L
W
T
2.0max
2.5
φ178mm Taping
(4mm pitch,
1000pcs/reel)
1210Typeꢁ
△
ALL
063
105
107
Standard
0.6±0.05
1.0±0.1
Standard
0.3±0.05
0.5±0.1
Standard
0.3±0.05
0.5±0.1
P
1.6+0.15/-0.05 0.8+0.15/-0.05 0.8+0.15/-0.05
0.45±0.05
Thickness:M
212
2.0+0.15/-0.05 1.25+0.15/-0.05
0.85±0.1
1.25+0.15/-0.05
0.85±0.1
A
316
3.2±0.2
3.2±0.3
1.6±0.2
2.5±0.3
1.6±0.2
2.5±0.3
325
105
1.0+0.15/-0.05 0.5+0.15/-0.05 0.5+0.15/-0.05
0.45±0.05
107
212
1.6+0.2/-0
0.8+0.2/-0
B
0.8+0.2/-0
0.85±0.1
1.25+0.2/-0
△=Blank space
2.0+0.2/-0
1.25+0.2/-0
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
T
Standard quantity [pcs]
Type
L
W
e
Paper tape Embossed tape
□MK042
0.4±0.02
0.2±0.02
0.2±0.02
0.3±0.03
C
P
0.1±0.03
-
40000
(01005 inch)
□MK063
(0201 inch)
0.6±0.03
1.0±0.05
1.6±0.10
2.0±0.10
0.3±0.03
0.5±0.05
0.8±0.10
1.25±0.10
0.15±0.05
15000
-
0.2±0.02
0.3±0.03
0.5±0.05
0.45±0.05
0.8±0.10
0.45±0.05
0.85±0.10
1.25±0.10
0.85±0.10
1.25±0.10
1.6±0.20
C
P
V
20000
15000
10000
-
-
-
□MK105
(0402 inch)
0.25±0.10
0.35±0.25
0.5±0.25
K
A
K
D
G
D
G
L
□MK107
(0603 inch)
4000
4000
—
—
□MK212
(0805 inch)
—
4000
3000
—
3000
□MK316
(1206 inch)
3.2±0.15
3.2±0.30
1.6±0.15
2.5±0.20
0.5+0.35/-0.25
0.6±0.3
—
—
2000
0.85±0.10
1.9±0.20
1.9+0.1/-0.2
2.5±0.20
D
N
Y
M
2000
□MK325
(1210 inch)
500(T), 1000(P)
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
4
■ AVAILABLE CAPACITANCE RANGE
●
Multilayer Ceramic Capacitorsꢁ
042
B/X5R
063
B/X5R
105
B/X5R
Type
X7R
X7R
25 16 25 16 10 6.3
X7R
F/Y5V
Cap
[pF]
VDC
10 10 6.3
4
4
50 25 16 10 6.3 50 35 25 16 10 6.3
4
50 25 16 10 6.3
〔3-digit〕
101
151
221
331
471
681
102
152
222
332
472
682
103
153
223
333
473
683
104
224
334
474
105
225
335
475
100
150
220
330
470
680
1000
1500
2200
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
P
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
C
C
C
C
C
C
P
P
P
P
P
P
P
P
P
P
P
P
V
V
V
V
V
V
3300
4700
6800
10000
15000
22000
33000
47000
68000
100000
220000
330000
470000
1000000
2200000
3300000
4700000
V
V
V
V
V
V
V
V
V
V
V
V
V
V
C
P
P
P
P
P
P
P
P
P
P
P
P
V
V
V
V
C
C
P
V
V
V
V
V
V
V
V
V
V
P
P
P
P
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
Note:Letters in the table indicate product thickness.ꢁ■■ X5R only
107
B/X5R
212
B/X5R
316
B/X5R
325
B/X5R
35 25 16 10 50 25 16 10 6.3 50 35 25 16 10 6.3 16 10 6.3
Type
Cap
〔μF〕
X7R
F/Y5V
X7R
F/Y5V
X7R
F/Y5V
X7R
F/Y5V
VDC 50 25 16 10 6.3 50 35 25 16 10 6.3
4
50 25 16 10 50 35 25 16 10 6.3 50 25 16 10 6.3 50 16 10 6.3 50 25 16 10 6.3 50 25 16 10 6.3
4
〔3-digit〕
104
0.1
A
G
G
G
G
G
G
G
0.15 154
0.22 224
0.33 334
0.47 474
0.68 684
105
2.2 225
3.3 335
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
L
L
A
A
A
A
A
G
G
1
A
A
A
A
A
A
A
A
A
A
A
A
A
G
G
G
G
G
G
G
G
G
L
L
L
L
L
L
A
A
A
G
G
G
G
G
G
G
G
G
L
L
L
L
L
L
L
L
L
N
N
N
N
N
4.7
475
6.8 685
A
A
A
G
G
G
G
G
G
G
G
L
L
L
M.N
N
N
M.N
N
N
10
22
47
106
226
476
A
A
G
G
G
G
G
G
G
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
M
M.N
M M
N
M N M.N
N
M
M.Y
N
M.Y
M
M
L
Y
M.N
M.Y
N N
M M
N
100 107
L
Note:Letters in the table indicate product thickness.ꢁ■■ X5R only
●Low Profile Multilayer Ceramic Capacitors
105
B/X5R
107
212
B/X5R
316
B/X5R
325
Type
VDC
Type
B/X5R
X7R
F/Y5V
X7R
F/Y5V
B/X5R
Cap
[pF]
Cap
〔μF〕
VDC 25 16 10 6.3 50 25 16 10 50 25 16 10 6.3 50 10 6.3 50 25 10 50 25 16 10 6.3 35 25 16 10 6.3 25 16 10
25 16 10 6.3
〔3-digit〕
101
151
221
331
471
681
102
152
222
332
472
682
103
153
223
333
473
683
104
224
334
474
105
225
335
475
〔3-digit〕
100
150
220
330
470
680
1000
1500
2200
0.1 104
D
D
0.22 224
0.33 334
0.47 474
0.68 684
D
D
D
D
D
1
105
K
K
K
K
K
K
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
2.2 225
3.3 335
4.7 475
6.8 685
D
D
D
D
D
G
D
D
K
K
D
D
D
D
D. K D.K
D
D
D
D
D
D
3300
4700
6800
G D
10
22
47
106
226
476
D
D.K
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
10000
15000
22000
33000
47000
68000
100000
220000
330000
470000
1000000
2200000
3300000
4700000
P
Note:Letters in the table indicate product thickness.ꢁ■■ X5R only
P
P
C
C
P
P
C
P
Temperature characteristics
Capacitance tolerance
Temp.char.Code
〔%〕
Applicable standard
Temperature range〔℃〕
-25~+85
Ref. Temp〔. ℃〕
Capacitance change〔%〕
JIS
B
20
25
25
20
25
±10
±15
±15
+30/-80
+22/-82
BJ
B7
F
±10(K)
±20(M)
EIA
EIA
JIS
EIA
X5R
X7R
F
-55~+85
-55~+125
-25~+85
+80
ꢁ
(Z)
-20
Y5V
-30~+85
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
5
■ REPRESENTATIVE PART NUMBERS
●042TYPE(01005 case size)
【Temperature Characteristic BJ:B/X5R】ꢁ・0.2mm thicknes(s C)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
X5R
100
150
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
5
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
10V
LMK042 BJ101□C
LMK042 BJ151□C
LMK042 BJ221□C
LMK042 BJ331□C
LMK042 BJ471□C
LMK042 BJ681□C
LMK042 BJ102□C
LMK042 BJ152□C
LMK042 BJ222□C
LMK042 BJ332□C
LMK042 BJ472□C
LMK042 BJ682□C
LMK042 BJ103□C
JMK042 BJ152□C
JMK042 BJ222□C
JMK042 BJ332□C
JMK042 BJ472□C
JMK042 BJ682□C
JMK042 BJ103□C
JMK042 BJ223□C
AMK042 BJ473MC
AMK042 BJ104MC
5
220
5
330
5
470
5
680
5
1000
1500
2200
3300
4700
6800
10000
1500
2200
3300
4700
6800
10000
22000
47000
100000
5
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
X5R
X5R
X5R
X5R
X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
X5R
6.3V
4V
X5R
X5R
±20
Capacitance tolerance code is applied to □ of part number.ꢁ*1 We may provide X7S/X7R for some items according to the individual specification.
【Temperature Characteristic B7:X7R】ꢁ・0.2mm thicknes(s C)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
10V
LMK042 B7101□C
LMK042 B7151□C
LMK042 B7221□C
LMK042 B7331□C
LMK042 B7471□C
LMK042 B7681□C
LMK042 B7102□C
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100
150
220
330
470
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
5
5
5
5
5
5
5
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
680
1000
Capacitance tolerance code is applied to □ of part number.
●063TYPE(0201 case size)
【Temperature Characteristic BJ:B/X5R】ꢁ・0.3mm thicknes(s P)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
X5R
100
150
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
150%
150%
150%
200%
150%
150%
150%
150%
150%
150%
150%
150%
150%
25V
TMK063 BJ101□P
TMK063 BJ151□P
TMK063 BJ221□P
TMK063 BJ331□P
TMK063 BJ471□P
TMK063 BJ681□P
TMK063 BJ102□P
TMK063 BJ152□P
TMK063 BJ222□P
TMK063 BJ332□P
TMK063 BJ472□P
TMK063 BJ682□P
TMK063 BJ103□P
EMK063 BJ152□P
EMK063 BJ222□P
EMK063 BJ332□P
EMK063 BJ472□P
EMK063 BJ682□P
EMK063 BJ103□P
EMK063 BJ104□P
LMK063 BJ223□P
LMK063 BJ333□P
LMK063 BJ473□P
LMK063 BJ683□P
LMK063 BJ104□P
LMK063 BJ224□P
JMK063 BJ223□P
JMK063 BJ333□P
JMK063 BJ473□P
JMK063 BJ683□P
JMK063 BJ104□P
JMK063 BJ224□P
AMK063 BJ224□P
AMK063 BJ334MP
AMK063 BJ474MP
220
330
470
680
1000
1500
2200
5
3300
5
4700
5
6800
5
10000
1500
5
16V
5
2200
5
3300
5
4700
5
6800
5
10000
100000
22000
33000
47000
68000
100000
220000
22000
33000
47000
68000
100000
220000
220000
330000
470000
1000000
5
10
7.5
7.5
7.5
10
10
10
7.5
7.5
7.5
10
10
10
10
10
10
10
10V
6.3V
4V
B/X5R
X5R
X5R
X5R
X5R
X5R
B/X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
*2
X5R
±20
±20
AMK063ABJ105MP
X5R
Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some items according to the individual specification. *2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
6
■ REPRESENTATIVE PART NUMBERS
【Temperature Characteristic B7:X7R】
・0.3mm thicknes(s P)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
25V
TMK063 B7101□P
TMK063 B7151□P
TMK063 B7221□P
TMK063 B7331□P
TMK063 B7471□P
TMK063 B7681□P
TMK063 B7102□P
EMK063 B7152□P
EMK063 B7222□P
EMK063 B7332□P
EMK063 B7472□P
EMK063 B7682□P
EMK063 B7103□P
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100
150
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
16V
5
5
5
5
5
Capacitance tolerance code is applied to □ of part number.
●105TYPE(0402 case size)
【Temperature Characteristic BJ:B/X5R】
・0.5mm thicknes(s V)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R
X5R
220
330
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
5
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5+0.15/-0.05
0.5±0.05
0.5±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
150%
200%
150%
200%
200%
150%
150%
150%
150%
200%
200%
200%
200%
200%
150%
150%
150%
200%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
150%
50V
UMK105 BJ221□V
UMK105 BJ331□V
UMK105 BJ471□V
UMK105 BJ681□V
UMK105 BJ102□V
UMK105 BJ152□V
UMK105 BJ222□V
UMK105 BJ332□V
UMK105 BJ472□V
UMK105 BJ682□V
UMK105 BJ103□V
GMK105 BJ104□V
TMK105 BJ153□V
TMK105 BJ223□V
TMK105 BJ333□V
TMK105 BJ473□V
TMK105 BJ104□V
TMK105 BJ105□V
EMK105 BJ153□V
EMK105 BJ223□V
EMK105 BJ333□V
EMK105 BJ473□V
EMK105 BJ683□V
EMK105 BJ104□V
EMK105 BJ224□V
EMK105 BJ105□V
LMK105 BJ104□V
LMK105 BJ224□V
LMK105 BJ474□V
LMK105 BJ105□V
LMK105 BJ225MV
JMK105 BJ224□V
JMK105 BJ474□V
JMK105 BJ105□V
JMK105 BJ225MV
JMK105 BJ475MV
AMK105 BJ335MV
AMK105 BJ475MV
470
680
1000
1500
2200
3300
4700
6800
10000
100000
15000
22000
33000
47000
100000
1000000
15000
22000
33000
47000
68000
100000
220000
1000000
100000
220000
470000
1000000
2200000
220000
470000
1000000
2200000
4700000
3300000
4700000
35V
25V
3.5
3.5
3.5
3.5
5
10
3.5
3.5
3.5
3.5
5
16V
5
5
10
5
10V
6.3V
4V
B/X5R
B/X5R
X5R
5
10
10
10
5
X5R
X5R
B/X5R
X5R
±10, ±20
±10, ±20
±10, ±20
±20
±20
±20
10
10
10
10
10
10
X5R
X5R
JMK105BBJ475MV
AMK105ABJ475MV
X5R
D
X5R
*2
X5R
±20
Capacitance tolerance code is applied to □ of part number.
*1 We may provide X7R for some items according to the individual specification.
*2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
7
■ REPRESENTATIVE PART NUMBERS
・0.3mm thicknes(s P)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
25V
TMK105 BJ103□P
TMK105 BJ104□P
TMK105 BJ224□P
TMK105 BJ474□P
EMK105 BJ474□P
JMK105 BJ105□P
B/X5R
X5R
X5R
X5R
X5R
X5R
10000
100000
220000
470000
470000
1000000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
5
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
150%
150%
150%
150%
150%
150%
10
10
10
10
10
16V
6.3V
・0.2mm thicknes(s C)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
10V
LMK105 BJ104□C
JMK105 BJ224□C
JMK105 BJ474□C
X5R
X5R
X5R
100000
220000
470000
±10, ±20
±10, ±20
±10, ±20
10
10
10
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
150%
150%
150%
6.3V
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic B7:X7R】
・0.5mm thicknes(s V)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 B7221□V
UMK105 B7331□V
UMK105 B7471□V
UMK105 B7681□V
UMK105 B7102□V
UMK105 B7152□V
UMK105 B7222□V
UMK105 B7332□V
UMK105 B7472□V
UMK105 B7682□V
UMK105 B7103□V
TMK105 B7152□V
TMK105 B7222□V
TMK105 B7332□V
TMK105 B7472□V
TMK105 B7682□V
TMK105 B7103□V
TMK105 B7224□V
EMK105 B7223□V
EMK105 B7473□V
EMK105 B7104□V
EMK105 B7224□V
LMK105 B7223□V
LMK105 B7473□V
LMK105 B7104□V
LMK105 B7224□V
LMK105 B7474□V
JMK105 B7224□V
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
220
330
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
2.5
2.5
2.5
2.5
2.5
3.5
10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
200%
200%
200%
200%
200%
200%
150%
200%
200%
150%
150%
200%
200%
150%
150%
150%
150%
470
680
1000
1500
2200
3300
4700
6800
10000
1500
25V
2200
3300
4700
6800
10000
220000
22000
47000
100000
220000
22000
47000
100000
220000
470000
220000
R
R
R
16V
10V
3.5
3.5
5
10
3.5
3.5
5
10
10
6.3V
5
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic F:Y5V】
・0.5mm thicknes(s V)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
50V
25V
16V
UMK105 F103ZV
TMK105 F223ZV
EMK105 F473ZV
EMK105 F104ZV
LMK105 F224ZV
JMK105 F474ZV
JMK105 F105ZV
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
10000
22000
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
5
5
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
150%
47000
7
100000
220000
470000
1000000
9
10V
11
12.5
20
6.3V
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
8
■ REPRESENTATIVE PART NUMBERS
●107TYPE
【Temperature Characteristic BJ:B/X5R】
・0.8mm thicknes(s A)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
UMK107 BJ474□A
UMK107 BJ105□A
GMK107 BJ105□A
TMK107 BJ224□A
TMK107 BJ474□A
TMK107 BJ105□A
TMK107 BJ225□A
EMK107 BJ224□A
EMK107 BJ474□A
EMK107 BJ105□A
EMK107 BJ225□A
EMK107 BJ475□A
LMK107 BJ224□A
LMK107 BJ474□A
LMK107 BJ105□A
LMK107 BJ225□A
LMK107 BJ475□A
LMK107 BJ106MA
JMK107 BJ225□A
JMK107 BJ475□A
JMK107 BJ106MA
AMK107 BJ106MA
AMK107 BJ226MA
UMK107ABJ474□A
X5R
X5R
0.47
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
10
5
0.8+0.15/-0.05
0.8±0.1
R
R
150%
150%
150%
200%
150%
150%
150%
200%
200%
150%
150%
150%
200%
200%
200%
150%
150%
150%
150%
150%
150%
150%
150%
D
35V
25V
B/X5R
B/X5R
B/X5R
B/X5R
X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
X5R
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
X5R
1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R
0.22
0.47
1
3.5
3.5
5
R/W
R
R
TMK107ABJ225□A
EMK107ABJ475□A
2.2
0.22
0.47
1
10
3.5
3.5
5
0.8+0.15/-0.05
0.8±0.1
R
D
D
16V
10V
R/W
R
0.8±0.1
0.8±0.1
0.8±0.1
R
2.2
4.7
0.22
0.47
1
10
10
3.5
3.5
5
R
0.8+0.15/-0.05
0.8±0.1
R
R/W
R
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R
2.2
4.7
10
10
10
10
10
10
10
10
10
R
R
LMK107BBJ106MA
X5R
0.8+0.2/-0
0.8±0.1
0.8±0.1
0.8+0.15/-0.05
0.8±0.1
0.8+0.2/-0
R
D
Special code:L
6.3V
4V
B/X5R
X5R
2.2
4.7
10
±10, ±20
±10, ±20
±20
±20
±20
R
R
JMK107ABJ106MA
AMK107BBJ226MA
X5R
R
X5R
10
R
X5R
22
R
・0.45mm thicknes(s K)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
25V
16V
10V
TMK107 BJ105□K
EMK107 BJ105□K
LMK107 BJ105□K
LMK107 BJ225□K
LMK107 BJ475MK
JMK107 BJ105□K
JMK107 BJ225□K
JMK107 BJ475MK
X5R
X5R
1
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±20
10
10
10
10
10
10
10
10
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
R
R
R
R
R
R
R
R
150%
150%
150%
150%
150%
150%
150%
150%
B/X5R
X5R
1
2.2
4.7
1
LMK107BBJ475MK
X5R
D
Special code:L
6.3V
B/X5R
X5R
2.2
4.7
X5R
Capacitance tolerance code is applied to □ of part number.
*1ꢁWe may provide X7R for some itemes according to the individual specification.
【Temperature Characteristic B7:X7R】
・0.8mm thicknes(s A)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
UMK107 B7224□A
UMK107 B7474□A
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.22
0.47
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
10
10
10
10
10
3.5
3.5
5
0.8±0.1
0.8±0.1
0.8+0.15/-0.05
0.8±0.1
R
R
150%
150%
150%
150%
150%
150%
150%
150%
200%
200%
150%
150%
200%
200%
150%
R
R
UMK107AB7105□A
R
25V
16V
TMK107 B7474□A
TMK107 B7105□A
EMK107 B7224□A
EMK107 B7474□A
EMK107 B7105□A
LMK107 B7224□A
LMK107 B7474□A
LMK107 B7105□A
LMK107 B7225□A
JMK107 B7224□A
JMK107 B7474□A
JMK107 B7105□A
0.47
1
R
R
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R
0.22
0.47
1
R/W
R
R
10V
0.22
0.47
1
3.5
3.5
5
R/W
R
R
2.2
0.22
0.47
1
10
3.5
3.5
5
R
6.3V
0.8±0.1
0.8±0.1
0.8±0.1
R/W
R
R
Capacitance tolerance code is applied to □ of part number.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
9
■ REPRESENTATIVE PART NUMBERS
【Temperature Characteristic F:Y5V】
・0.8mm thicknes(s A)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
25V
16V
UMK107 F104ZA
TMK107 F474ZA
EMK107 F224ZA
EMK107 F474ZA
EMK107 F105ZA
EMK107 F225ZA
LMK107 F105ZA
LMK107 F225ZA
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
0.1
0.47
0.22
0.47
1
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
7
7
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R/W
R/W
R/W
R/W
R
200%
200%
200%
200%
200%
200%
200%
200%
7
7
16
16
16
16
2.2
1
R
10V
R
2.2
R
●212TYPE
【Temperature Characteristic BJ:B/X5R】
・1.25mm thicknes(s G)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
UMK212 BJ104□G
UMK212 BJ224□G
UMK212 BJ474□G
UMK212 BJ105□G
TMK212 BJ225□G
TMK212 BJ475□G
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
B/X5R
X5R
0.1
0.22
0.47
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
3.5
3.5
3.5
5
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
R/W
R/W
R/W
R/W
R
200%
150%
150%
150%
150%
150%
150%
200%
150%
150%
200%
200%
200%
150%
200%
200%
150%
150%
25V
16V
10V
2.2
4.7
10
5
TMK212ABJ475□G
TMK212BBJ106MG
10
10
5
1.25+0.15/-0.05
1.25+0.2/-0
1.25±0.1
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25±0.1
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.2/-0
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.15/-0.05
1.25+0.2/-0
R
X5R
B/X5R*1
EMK212ABJ475□G B/X5R*1
X5R
B/X5R*1
LMK212ABJ475□G B/X5R*1
R
EMK212 BJ225□G
EMK212 BJ475□G
EMK212 BJ106□G
LMK212 BJ225□G
LMK212 BJ475□G
LMK212 BJ106□G
LMK212 BJ226MG
JMK212 BJ475□G
JMK212 BJ106□G
JMK212 BJ226MG
JMK212 BJ476MG
2.2
4.7
10
R
5
R
EMK212ABJ106□G
10
5
R
2.2
4.7
10
R
5
R
LMK212ABJ106□G
LMK212BBJ226MG
JMK212ABJ475□G
JMK212ABJ106□G
JMK212ABJ226MG
JMK212BBJ476MG
X5R
10
10
5
R
X5R
22
R
6.3V
B/X5R
X5R*1
X5R
4.7
10
±10, ±20
±10, ±20
±20
R
10
10
10
R
22
R
X5R
47
±20
R
・0.85mm thicknes(s D)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
25V
UMK212 BJ105□D
TMK212 BJ474□D
TMK212 BJ105□D
TMK212 BJ225□D
TMK212 BJ475□D
EMK212 BJ105□D
EMK212 BJ225□D
EMK212 BJ475□D
EMK212 BJ106□D
LMK212 BJ105□D
LMK212 BJ225□D
LMK212 BJ475□D
LMK212 BJ106□D
JMK212 BJ475□D
JMK212 BJ106□D
JMK212 BJ226MD
UMK212ABJ105□D
X5R
B/X5R
B/X5R
B/X5R
X5R
1
0.47
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
10
3.5
5
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
150%
200%
200%
150%
150%
200%
200%
150%
150%
200%
200%
200%
150%
200%
200%
150%
D
D
D
TMK212ABJ225□D
TMK212BBJ475□D
2.2
4.7
1
5
10
5
16V
10V
B/X5R*1
EMK212ABJ225□D B/X5R*1
2.2
4.7
10
1
5
B/X5R
10
10
3.5
5
EMK212ABJ106□D
LMK212ABJ106□D
X5R
B/X5R*1
B/X5R*1
B/X5R
X5R
2.2
4.7
10
4.7
10
22
10
10
10
10
10
6.3V
X5R
JMK212ABJ106□D
JMK212ABJ226MD
X5R
X5R
・0.45mm thicknes(s K)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
10V
LMK212 BJ475□K
JMK212 BJ475□K
JMK212 BJ106MK
LMK212ABJ475□K
JMK212ABJ475□K
JMK212ABJ106MK
X5R
X5R
X5R
4.7
4.7
10
±10, ±20
±10, ±20
±20
10
10
10
0.45±0.05
0.45±0.05
0.45±0.05
R
R
R
150%
150%
150%
6.3V
Capacitance tolerance code is applied to □ of part number.
*1ꢁWe may provide X7R for some itemes according to the individual specification.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
10
■ REPRESENTATIVE PART NUMBERS
【Temperature Characteristic B7:X7R】
・1.25mm thicknes(s G)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
UMK212 B7104□G
UMK212 B7224□G
UMK212 B7474□G
UMK212 B7105□G
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.1
0.22
0.47
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
3.5
3.5
3.5
10
10
3.5
3.5
10
10
3.5
10
10
10
3.5
5
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25+0.2/-0
1.25±0.1
1.25±0.1
1.25±0.1
1.25+0.15/-0.05
1.25±0.1
1.25±0.1
1.25±0.1
1.25+0.2/-0
1.25±0.1
1.25±0.1
1.25±0.1
1.25+0.15/-0.05
1.25+0.15/-0.05
R/W
R/W
R/W
R/W
R
200%
150%
150%
150%
150%
150%
150%
150%
150%
200%
150%
150%
150%
200%
200%
150%
150%
150%
UMK212BB7225□G
TMK212AB7475□G
EMK212BB7106MG
2.2
1
35V
25V
GMK212 B7105□G
TMK212 B7105□G
TMK212 B7225□G
TMK212 B7475□G
EMK212 B7105□G
EMK212 B7225□G
EMK212 B7475□G
R/W
R/W
R
1
2.2
4.7
1
R
D
R
16V
10V
R/W
R
2.2
4.7
10
R
R
LMK212 B7105□G
LMK212 B7225□G
LMK212 B7475□G
LMK212 B7106MG
JMK212 B7106□G
1
±10, ±20
±10, ±20
±10, ±20
±20
R/W
R
2.2
4.7
10
10
10
10
R
LMK212AB7106MG
R
D
6.3V
JMK212AB7106□G
10
±10, ±20
R
・0.85mm thicknes(s D)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
UMK212AB7104□D
UMK212AB7224□D
UMK212AB7474□D
UMK212AB7105□D
TMK212AB7225□D
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.1
0.22
0.47
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
10
10
10
10
10
3.5
5
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
150%
150%
150%
150%
150%
200%
200%
150%
200%
200%
150%
R
R
25V
16V
2.2
0.47
1
R
R
R
EMK212 B7474□D
EMK212 B7105□D
EMK212 B7225□D
LMK212 B7105□D
LMK212 B7225□D
LMK212 B7475□D
R/W
R
EMK212AB7225□D
2.2
1
5
R
10V
3.5
5
R
LMK212AB7225□D
LMK212AB7475□D
2.2
4.7
R
10
R
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic F:Y5V】
・1.25mm thicknes(s G)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
Note
Note
% Rated
voltage
50V
UMK212 F474ZG
UMK212 F105ZG
EMK212 F225ZG
LMK212 F475ZG
LMK212 F106ZG
JMK212 F106ZG
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
F/Y5V
0.47
1
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
+80/-20
7
7
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
R/W
R/W
R/W
R
200%
200%
200%
200%
200%
200%
16V
10V
2.2
4.7
10
7
9
16
16
R
6.3V
10
R
・0.85mm thicknes(s D)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
% Rated
voltage
50V
10V
UMK212 F224ZD
LMK212 F225ZD
JMK212 F475ZD
F/Y5V
F/Y5V
F/Y5V
0.22
2.2
+80/-20
+80/-20
+80/-20
7
9
0.85±0.1
0.85±0.1
0.85±0.1
R/W
R
200%
200%
200%
6.3V
4.7
16
R
●316Type
【Temperature Characteristic BJ:B/X5R】
・1.6mm thicknes(s L)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
% Rated
voltage
50V
UMK316 BJ105□L
UMK316 BJ475□L
TMK316 BJ225□L
TMK316 BJ475□L
TMK316 BJ106□L
EMK316 BJ225□L
EMK316 BJ475□L
EMK316 BJ106□L
EMK316 BJ226ML
LMK316 BJ106□L
LMK316 BJ226ML
LMK316 BJ476ML
JMK316 BJ106□L
JMK316 BJ226□L
JMK316 BJ476ML
JMK316 BJ107ML
AMK316 BJ107ML
B/X5R*1
X5R
B/X5R*1
B/X5R
X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R
B/X5R*1
B/X5R
X5R
B/X5R*1
B/X5R
X5R
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±20
±20
±10, ±20
±10, ±20
±20
3.5
10
3.5
5
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R
R
200%
150%
200%
150%
150%
200%
200%
150%
150%
200%
150%
150%
200%
200%
200%
150%
150%
4.7
2.2
4.7
10
25V
16V
R
R
5
R
2.2
4.7
10
3.5
5
R/W
R
5
R
EMK316ABJ226ML
22
10
5
R
10V
10
R
LMK316ABJ226ML
LMK316ABJ476ML
22
10
10
5
R
47
R
6.3V
10
R
JMK316ABJ226□L
JMK316ABJ476ML
JMK316ABJ107ML
AMK316ABJ107ML
22
10
10
10
10
R
47
R
X5R
100
100
±20
±20
R
4V
X5R
R
Capacitance tolerance code is applied to □ of part number.
*1ꢁWe may provide X7R for some itemes according to the individual specification.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
11
■ REPRESENTATIVE PART NUMBERS
・0.85mm thicknes(s D)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
UMK316 BJ105□D
UMK316 BJ225□D
UMK316 BJ475□D
TMK316 BJ105□D
TMK316 BJ225□D
TMK316 BJ475□D
TMK316 BJ106□D
EMK316 BJ225□D
EMK316 BJ475□D
EMK316 BJ106□D
EMK316 BJ226MD
LMK316 BJ475□D
LMK316 BJ106□D
LMK316 BJ226MD
JMK316 BJ106□D
JMK316 BJ226MD
JMK316 BJ476MD
B/X5R
B/X5R
X5R
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
±10, ±20
±10, ±20
±20
±10, ±20
±20
3.5
3.5
10
3.5
3.5
5
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
150%
150%
150%
200%
150%
150%
150%
200%
200%
150%
150%
200%
200%
150%
200%
150%
150%
2.2
4.7
1
UMK316ABJ475□D
TMK316ABJ106□D
D
D
D
25V
16V
B/X5R
B/X5R
X5R
2.2
4.7
10
2.2
4.7
10
22
4.7
10
22
10
22
47
X5R
10
3.5
5
B/X5R
B/X5R
X5R
10
10
5
EMK316ABJ226MD
LMK316ABJ226MD
X5R
10V
B/X5R
B/X5R
X5R
10
10
10
10
10
6.3V
B/X5R
X5R
JMK316ABJ226MD
JMK316ABJ476MD
X5R
±20
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic B7:X7R】
・1.6mm thicknes(s L)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
UMK316 B7224□L
UMK316 B7474□L
UMK316 B7105□L
UMK316 B7225□L
UMK316 B7475□L
TMK316 B7105□L
TMK316 B7225□L
TMK316 B7475□L
TMK316 B7106□L
EMK316 B7225□L
EMK316 B7106□L
LMK316 B7225□L
LMK316 B7475□L
LMK316 B7106□L
LMK316 B7226ML
JMK316 B7106□L
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.22
0.47
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±20
2.5
3.5
3.5
10
10
3.5
3.5
10
10
3.5
10
3.5
5
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R/W
R/W
R
200%
200%
200%
150%
150%
200%
200%
200%
150%
200%
200%
200%
200%
200%
150%
200%
2.2
4.7
1
R
UMK316AB7475□L
R
D
25V
R/W
R
2.2
4.7
10
TMK316AB7475□L
TMK316AB7106□L
R
D
D
R
16V
10V
2.2
10
R/W
R
EMK316AB7106□L
D
2.2
4.7
10
R/W
R
LMK316AB7106□L
LMK316AB7226ML
10
10
5
R
D
R
22
R
6.3V
10
±10, ±20
R
Capacitance tolerance code is applied to □ of part number.
・0.85mm thicknes(s D)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
25V
10V
UMK316 B7225□D
X7R
X7R
X7R
2.2
4.7
10
±10, ±20
±10, ±20
±20
10
10
10
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
150%
150%
150%
TMK316AB7475□D
LMK316AB7106MD
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic F:F/Y5V】
・1.6mm thicknes(s L)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
35V
25V
16V
10V
GMK316 F106ZL
TMK316 F106ZL
EMK316 F106ZL
LMK316 F226ZL
F/Y5V
F/Y5V
F/Y5V
F/Y5V
10
10
10
22
+80/-20
+80/-20
+80/-20
+80/-20
9
9
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R
R
R
R
200%
200%
200%
200%
9
16
・1.25mm thicknes(s G)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
Thickness
〔mm〕
Part number 1
Part number 2
Part number 2
Note
Note
% Rated
voltage
〔%〕
50V
35V
UMK316 F225ZG
GMK316 F475ZG
F/Y5V
F/Y5V
2.2
4.7
+80/-20
+80/-20
7
7
1.25±0.1
1.25±0.1
R/W
R
200%
200%
・0.85mm thicknes(s D)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
% Rated
voltage
10V
LMK316 F475ZD
JMK316 F106ZD
F/Y5V
F/Y5V
4.7
10
+80/-20
+80/-20
9
0.85±0.1
0.85±0.1
R
R
200%
200%
6.3V
16
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
12
■ REPRESENTATIVE PART NUMBERS
●325Type
【Temperature Characteristic BJ:B/X5R】
・2.5mm thicknes(s M)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
UMK325 BJ475MM
UMK325 BJ106MM
TMK325 BJ106MM
EMK325 BJ226MM
EMK325 BJ476MM
LMK325 BJ226MM
LMK325 BJ476MM
LMK325 BJ107MM
JMK325 BJ476MM
JMK325 BJ107MM
X5R
X5R
B/X5R*1
B/X5R
X5R
4.7
10
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
5
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.3
2.5±0.2
2.5±0.3
R
R
R
R
R
R
R
R
R
R
150%
150%
150%
150%
150%
200%
150%
150%
150%
150%
25V
16V
10
3.5
5
22
47
10
5
10V
B/X5R
X5R
22
47
10
10
10
10
LMK325ABJ107MM
JMK325ABJ107MM
X5R
100
47
6.3V
X5R
X5R
100
・1.9mm thicknes(s Y, N)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
35V
UMK325 BJ475MN
GMK325 BJ225MN
GMK325 BJ475MN
GMK325 BJ106MN
TMK325 BJ335MN
TMK325 BJ475MN
TMK325 BJ106MN
EMK325 BJ475MN
EMK325 BJ106MN
EMK325 BJ476MY
LMK325 BJ226MY
LMK325 BJ106MN
JMK325 BJ226MY
JMK325 BJ107MY
JMK325 BJ476MN
X5R
B/X5R
X5R
4.7
2.2
4.7
10
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
10
3.5
10
5
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9+0.1/-0.2
1.9+0.1/-0.2
1.9±0.2
1.9+0.1/-0.2
1.9+0.1/-0.2
1.9±0.2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
150%
200%
150%
150%
200%
200%
200%
200%
200%
150%
150%
200%
200%
150%
150%
B/X5R
B/X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R
X5R
25V
16V
3.3
4.7
10
3.5
3.5
5
4.7
10
3.5
3.5
10
5
47
10V
B/X5R
B/X5R*1
B/X5R
X5R
22
10
3.5
5
6.3V
22
100
47
10
10
X5R
・0.85mm thicknes(s D)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
25V
16V
TMK325 BJ106MD
EMK325 BJ106MD
EMK325 BJ226MD
LMK325 BJ335MD
LMK325 BJ475MD
LMK325 BJ106MD
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R
B/X5R
10
10
±20
±20
±20
±20
±20
±20
5
5
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R
150%
150%
150%
200%
200%
150%
22
3.3
4.7
10
10
3.5
5
10V
5
*1ꢁWe may provide X7R for some itemes according to the individual specification.
【Temperature Characteristic B7:X7R】
・2.5mm thicknes(s M)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
Thickness
〔mm〕
Part number 1
UMK325 B7475MM
TMK325 B7226MM
Part number 2
Note
% Rated
voltage
〔%〕
50V
25V
X7R
X7R
X7R
X7R
X7R
X7R
X7R
4.7
10
22
10
22
47
47
±20
±20
±20
±20%
±20
±20
5
2.5±0.2
2.5±0.3
2.5±0.2
2.5±0.3
2.5±0.2
2.5±0.2
2.5±0.2
R
R
R
R
R
R
R
150%
150%
150%
150%
150%
150%
200%
UMK325AB7106MM
TMK325AB7106MM
10
10
10
10
10
10
R
16V
10V
EMK325 B7226MM
LMK325 B7476MM
JMK325 B7476MM
R
R
R
6.3V
±20
・1.9mm thicknes(s N)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
50V
25V
UMK325 B7475MN
TMK325 B7335MN
TMK325 B7475MN
TMK325 B7106MN
EMK325 B7475MN
EMK325 B7106MN
LMK325 B7106MN
X7R
X7R
X7R
X7R
X7R
X7R
X7R
4.7
3.3
4.7
10
±20
±20
±20
±20
±20
±20
±20
10
3.5
3.5
10
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
R
R
R
R
R
R
R
150%
200%
150%
150%
200%
150%
200%
R
R
16V
10V
4.7
10
3.5
3.5
3.5
10
【Temperature Characteristic F:F/Y5V】
・1.9mm thicknes(s N)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔μF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
16V
10V
EMK325 F226ZN
LMK325 F226ZN
JMK325 F476ZN
F/Y5V
F/Y5V
F/Y5V
22
22
47
+80/-20
+80/-20
+80/-20
16
16
16
1.9±0.2
1.9±0.2
1.9±0.2
R
R
R
200%
200%
200%
6.3V
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
13
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
Taiyo Yuden multilayer ceramic capacitor
■
JMK107ABJ106MA
AMK107BBJ226MA
AMK107 BJ226MA
TMK212BBJ106MG
TMK107 BJ105KA
JMK107 BJ106MA
TMK316 BJ106KL
EMK325 BJ476MY
LMK107 F225ZA
UMK316 F225ZG
JMK212ABJ226MG
JMK212 BJ226MG
JMK316ABJ476ML
JMK316 BJ476ML
JMK316ABJ107ML
JMK316 BJ107ML
GMK325 BJ106MN
LMK107 F105ZA
LMK212 F106ZG
JMK325 F476ZN
JMK325 BJ107MY
UMK107 F104ZA
UMK212 F105ZG
LMK316 F226ZL
UMK212 F224ZD
GMK316 F106ZL
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
14
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc01_e-01
15
STANDARD MULTILAYER CERAMIC CAPACITORS
TEMPERATURE COMPENSATING TYPE
(
)
REFLOW
■ FEATURES
■ APPLICATIONS
◦Gꢀ eneral electronic equipment
◦ꢀImproved higher density mounting.
◦Cꢀ ommunication equipment
(cellular phone, wireless applications, etc.)
◦ꢀMonolithic structure provides higher reliability.
◦A wide range of capacitance values available in standard case sizes.
■ PART NUMBER
U M K 1 0 5 △ C H 1 0 1 J V - F △
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬
❶Rated voltage
〔VDC〕
❸End termination
Plated
❻Temperature characteristics〔ppm/℃〕
❽Capacitance
❿Special code
tolerance
K
C□:0
R□:-220 RH
S□:-330 SH、SJ、SK
T□:-470 TJ、TK
U□:-750 UJ、UK
SL:+350~-1000
CH、CJ、CK
-
Standard
E
16
25
50
Tolerance
H:±60
J:±120
K:±250
C
D
F
±0.25pF
±0.5pF
±1pF
❹Dimension
T
⓫Packaging
Type (inch) L×W〔mm〕
042 (01005) 0.4×0.2
063 (0201) 0.6×0.3
105 (0402) 1.0×0.5
U
φ178mm Taping
(2mm pitch)
F
J
±5%
❷Series name
K
±10%
φ178mm Taping
(1mm pitch, 042 Type)
W
Multilayer ceramic
capacitor
□=Tolerance
M
❾Thicknes〔s mm〕
⓬Internal code
❺Dimension tolerance
Standard
△=Blank space
❼Nominal capacitance〔pF〕
example
C,D
0.2
0.3
0.5
△
Standard
△
T
△=Blank space
0R5
010
100
0.5
V, W
1
10
※R=decimal point
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
Standard quantity [pcs]
Type
L
W
T
e
Paper tape
Embossed tape
□MK042
0.4±0.02
0.2±0.02
0.2±0.02
0.3±0.03
0.5±0.05
C,D
T
0.1±0.03
-
40000
(01005 inch)
□MK063
(0201 inch)
□MK105
(0402 inch)
0.6±0.03
1.0±0.05
0.3±0.03
0.5±0.05
0.15±0.05
0.25±0.10
15000
10000
-
-
V,W
■ AVAILABLE CAPACITANCE RANGE
042
C□
063
105
50V
Type
C□
U□
C□
U□
SL
R□
S□
T□
Cap
[pF]
VDC
[3-digit]
16V
50V
25V
0.5
1
0R5
010
1R5
020
030
040
050
060
070
080
090
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
1.5
2
3
4
5
D
T
6
W
W
7
8
9
W
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
T
V
V
C
V
Note: Letters in the table indicate thickness.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
16
■ REPRESENTATIVE PART NUMBERS
●042TYPE
Class1【C△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
16V
EMK042 CK0R5CD
EMK042 CK010CD
EMK042 CK1R5CD
EMK042 CK020CD
EMK042 CJ030CD
EMK042 CH040CD
EMK042 CH050CD
EMK042 CH060DD
EMK042 CH070DD
EMK042 CH080DD
EMK042 CH090DD
EMK042 CH100DD
EMK042 CH120JD
EMK042 CH150JD
EMK042 CH180JC
EMK042 CH220JC
EMK042 CH270JC
EMK042 CH330JC
EMK042 CH390JC
EMK042 CH470JC
EMK042 CH560JC
EMK042 CH680JC
EMK042 CH820JC
EMK042 CH101JC
CK
CK
CK
CK
CJ
0.5
1
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.5
2
430
440
460
480
500
520
3
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
4
5
6
7
540
8
560
580
600
640
700
9
10
12
15
18
22
27
33
39
47
56
68
82
100
760
840
940
1000
1000
1000
1000
1000
1000
1000
±5%
±5%
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
●063TYPE
Class1【C△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK063 CK0R5CT
UMK063 CK010CT
UMK063 CK1R5CT
UMK063 CK020CT
UMK063 CJ030CT
UMK063 CH040CT
UMK063 CH050CT
UMK063 CH060DT
UMK063 CH070DT
UMK063 CH080DT
UMK063 CH090DT
UMK063 CH100DT
UMK063 CH120JT
UMK063 CH150JT
UMK063 CH180JT
UMK063 CH220JT
UMK063 CH270JT
UMK063 CH330JT
UMK063 CH390JT
UMK063 CH470JT
UMK063 CH560JT
UMK063 CH680JT
UMK063 CH820JT
UMK063 CH101JT
CK
CK
CK
CK
CJ
0.5
1
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.5
2
430
440
460
480
500
520
3
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
4
5
6
7
540
8
560
580
600
640
700
9
10
12
15
18
22
27
33
39
47
56
68
82
100
760
840
940
1000
1000
1000
1000
1000
1000
1000
±5%
±5%
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【U△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
25V
TMK063 UK0R5CT
TMK063 UK010CT
TMK063 UK1R5CT
TMK063 UK020CT
TMK063 UK030CT
TMK063 UJ040CT
TMK063 UJ050CT
TMK063 UJ060DT
TMK063 UJ070DT
TMK063 UJ080DT
TMK063 UJ090DT
TMK063 UJ100DT
TMK063 UJ120JT
TMK063 UJ150JT
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
0.5
1
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
410
420
430
440
460
480
500
520
540
560
580
600
640
700
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.5
2
3
4
5
6
7
8
9
10
12
15
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
17
■ REPRESENTATIVE PART NUMBERS
●105TYPE
Class1【C△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 CK0R5CV
UMK105 CK010CV
UMK105 CK1R5CV
UMK105 CK020CV
UMK105 CJ030CV
UMK105 CH040CV
UMK105 CH050CV
UMK105 CH060DV
UMK105 CH070DV
UMK105 CH080DV
UMK105 CH090DV
UMK105 CH100DV
UMK105 CH120JV
UMK105 CH150JV
UMK105 CH180JV
UMK105 CH220JV
UMK105 CH270JV
UMK105 CH330JV
UMK105 CH390JV
UMK105 CH470JV
UMK105 CH560JV
UMK105 CH680JV
UMK105 CH820JV
UMK105 CH101JV
UMK105 CH121JV
UMK105 CH151JV
UMK105 CH181JV
UMK105 CH221JV
UMK105 CH271JV
UMK105 CH331JV
CK
CK
CK
CK
CJ
0.5
1
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.5
2
430
440
3
460
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
4
480
5
500
6
520
7
540
8
560
9
580
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【U△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 UK0R5CV
UMK105 UK010CV
UMK105 UK1R5CV
UMK105 UK020CV
UMK105 UK030CV
UMK105 UJ040CV
UMK105 UJ050CV
UMK105 UJ060DV
UMK105 UJ070DV
UMK105 UJ080DV
UMK105 UJ090DV
UMK105 UJ100DV
UMK105 UJ120JV
UMK105 UJ150JV
UMK105 UJ180JV
UMK105 UJ220JV
UMK105 UJ270JV
UMK105 UJ330JV
UMK105 UJ390JV
UMK105 UJ470JV
UMK105 UJ560JV
UMK105 UJ680JV
UMK105 UJ820JV
UMK105 UJ101JV
UMK105 UJ121JV
UMK105 UJ151JV
UMK105 UJ181JV
UMK105 UJ221JV
UMK105 UJ271JV
UMK105 UJ331JV
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
0.5
1
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.5
2
430
440
3
460
4
480
5
500
6
520
7
540
8
560
9
580
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
18
■ REPRESENTATIVE PART NUMBERS
Class1【SL characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 SL121JV
UMK105 SL151JV
UMK105 SL181JV
UMK105 SL221JV
UMK105 SL271JV
UMK105 SL331JV
SL
SL
SL
SL
SL
SL
120
150
180
220
270
330
±5%
±5%
±5%
±5%
±5%
±5%
1000
1000
1000
1000
1000
1000
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【RH characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 RH5R6JW
UMK105 RH6R8JW
UMK105 RH8R2JW
UMK105 RH100JW
UMK105 RH120JW
UMK105 RH150JW
UMK105 RH180JW
UMK105 RH200JW
RH
RH
RH
RH
RH
RH
RH
RH
5.6
6.8
8.2
10
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
12
15
18
20
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【S△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 SK0R5BW
UMK105 SK010BW
UMK105 SK1R2BW
UMK105 SK1R5BW
UMK105 SK1R8BW
UMK105 SK2R2JW
UMK105 SK2R7JW
UMK105 SJ3R3JW
UMK105 SJ3R9JW
UMK105 SH4R7JW
UMK105 SH5R6JW
UMK105 SH6R8JW
UMK105 SH8R2JW
UMK105 SH100JW
UMK105 SH120JW
UMK105 SH150JW
UMK105 SH180JW
UMK105 SH200JW
SK
SK
SK
SK
SK
SK
SK
SJ
0.5
1
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
424
430
436
444
454
466
478
494
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
SJ
SH
SH
SH
SH
SH
SH
SH
SH
SH
12
15
18
20
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
Class1【T△ characteristic】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 TK0R5BW
UMK105 TK010BW
UMK105 TK1R2BW
UMK105 TK1R5BW
UMK105 TK1R8BW
UMK105 TK2R2JW
UMK105 TK2R7JW
UMK105 TK3R3JW
UMK105 TK3R9JW
UMK105 TJ4R7JW
UMK105 TJ5R6JW
UMK105 TJ6R8JW
UMK105 TJ8R2JW
UMK105 TJ100JW
UMK105 TJ120JW
UMK105 TJ150JW
UMK105 TJ180JW
UMK105 TJ200JW
TK
TK
TK
TK
TK
TK
TK
TK
TK
TJ
0.5
1
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
410
420
424
430
436
444
454
466
478
494
512
536
564
600
640
700
760
800
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
TJ
TJ
TJ
TJ
TJ
12
TJ
15
TJ
18
TJ
20
Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc02_e-01
19
MULTILAYER CERAMIC CAPACITORS
FOR HIGH FREQUENCY APPLICATIONS
(1GHz+)
REFLOW
■ FEATURES
■ APPLICATIONS
◦ꢀQ value in the high frequency range (1 GHz+) is superior compared to
◦Sꢀ uitable for those high frequency applications in which a capacitor
with both a high Q-value and small size is required such as portable
communications and other wireless applications.
VCO, TCXO etc.
other types of multilayer capacitors.
◦ꢀThe 1005(0402) case size is designed for high density mounting and
weight reduction in various applications.
◦Aꢀ djustment of characteristics in high frequency circuit
■ PART NUMBER
U V K 1 0 5 △ R H 4 R 3 J W - F △
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬
❺Dimension
❶Rated voltage
〔VDC〕
❸End termination
❼Nominal
capacitance〔pF〕
example
020
4R3
❽Capacitance
❿Special code
Standard
⓬ Internal code
Standard
tolerance
Standard
tolerance
K
Plated
-
△
△
E
16
B
J
±0.1pF
±5%
△=Blank Space
△=Blank Space
U
50
2
4.3
❻Temperature
characteristics〔ppm/℃〕
CH
❹Dimension
❾Thickness〔mm〕
0.5
⓫Packaging
φ178mm Taping
(2mm pitch)
❷Series name
※R=Decimal point
Type (inch) L×W〔mm〕
105 (0402) 1.0×0.5
W
Multilayer ceramic
capacitor for high
frequency
0±60
-220±60
F
V
RH
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
Standard quantity [pcs]
Paper tape Embossed tape
Type
L
W
T
e
□VK105
(0402 inch)
1.0±0.05
0.5±0.05
0.5±0.05
0.25±0.1
10000
-
■ SPECIFICATIONS
●Capacitance vs Q value(Typical for CH characteristic)
Temperature
Coefficient range
Temperature
Characteristics
Operating
Temperature range
Capacitance
Tolerance
[ppm/℃]
CH
RH
ꢁꢁ0±60
-220±60
±0.1pF(~2.0pF)
±5%(2.2pF~)
-55~+125℃
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc04_e-01
20
■ PART NUMBERS
Temperature
characteristics
EHS
Rated Voltage
(DC)
(Environmental
Hazardous
Substances)
Capacitance Capacitance
Q
Thickness
[mm]
Part number
Typical Q
〔pF〕
tolerance
(at 1GHz()min.)
CH
RH
□VK105 CH0R3BW
□VK105 CH0R4BW
□VK105 CH0R5BW
□VK105 CH0R6BW
□VK105 CH0R7BW
□VK105 CH0R8BW
□VK105 CH0R9BW
□VK105 CH010BW
□VK105 CH1R1BW
□VK105 CH1R2BW
□VK105 CH1R3BW
□VK105 CH1R5BW
□VK105 CH1R6BW
□VK105 CH1R8BW
□VK105 CH020BW
□VK105 CH2R2JW
□VK105 CH2R4JW
□VK105 CH2R7JW
□VK105 CH030JW
□VK105 CH3R3JW
□VK105 CH3R6JW
□VK105 CH3R9JW
□VK105 CH4R3JW
□VK105 CH4R7JW
□VK105 CH5R1JW
□VK105 RH0R5BW
□VK105 RH0R6BW
□VK105 RH0R7BW
□VK105 RH0R8BW
□VK105 RH0R9BW
□VK105 RH010BW
□VK105 RH1R1BW
□VK105 RH1R2BW
□VK105 RH1R3BW
□VK105 RH1R5BW
□VK105 RH1R6BW
□VK105 RH1R8BW
□VK105 RH020BW
□VK105 RH2R2JW
□VK105 RH2R4JW
□VK105 RH2R7JW
□VK105 RH030JW
□VK105 RH3R3JW
□VK105 RH3R6JW
□VK105 RH3R9JW
□VK105 RH4R3JW
□VK105 RH4R7JW
□VK105 RH5R1JW
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
300
300
300
300
300
300
300
300
280
270
260
240
230
210
190
180
170
150
130
120
110
99
1200
1200
1200
1100
1100
1000
950
950
930
850
740
±0.1pF
710
670
650
610
530
510
460
390
370
360
360
360
340
320
1100
1000
1000
970
950
900
900
740
±5%
±0.1pF
±5%
84
84
E: 16V
U: 50V
0.5±0.05
84
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
300
300
300
300
300
300
280
270
260
240
230
210
190
180
170
150
130
120
110
99
700
680
640
620
570
480
470
420
360
350
340
340
340
320
310
84
84
84
□Please specify the Rated Voltage code.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc04_e-01
21
SUPER LOW DISTORTION MULTILAYER
CERAMIC CAPACITORS
CFCAPTM
(
)
REFLOW
■ FEATURES
■ APPLICATIONS
◦ꢀNewly developed dielectric material and the use of nickel for internal
electrodes provide superior temperature characteristics with high ca-
pacitance, small case size and low cost.
◦Sꢀ ignal line for AV products
◦Aꢀ nalog signal coupling applications
◦Pꢀ LL circuit of mobile phones
◦ꢀLow distortion and low shock noise make these capacitors appropri-
ate for use in analog or digital mobile devices.
◦Gꢀ ood temperature characteristics for time constant circuits, oscilla-
tion circuits and filters
◦ꢀSuperior heat-resistance, high breakdown voltage, and mechanical
strength make these capacitors appropriate for replacing film capacitors.
■ PART NUMBER
T M K 3 1 6 △ S D 1 0 4 K L - T △
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬
❹Dimension
⓬Internal code
Standard
△=Blank space
❾Thickness
〔mm〕
❿Special code
❽Capacitance
❶Rated
❸End termination
❻Series symbol
SD Standard
Type (inch) L×W〔mm〕
105 (0402) 1.0×0.5
107 (0603) 1.6×0.8
212 (0805) 2.0×1.25
316 (1206) 3.2×1.6
tolerance
voltage〔VDC〕
△
-
Standard
K
Plated
P
0.3
K
±10%
U
G
T
E
L
50
35
25
16
10
6.3
❼Nominal
capacitance〔μF〕
example
V
A
D
F
0.5
⓫Packaging
0.8
φ178mm Taping
(4mm pitch)
107, 212, 316 Type
0.85
1.15
1.25
1.6
❷Series name
Multilayer ceramic
capacitor
223
104
0.022
0.1
T
F
❺Dimension tolerance
M
G
L
J
△
Standard
φ178mm Taping
(2mm pitch)
105 Type
△=Blank space
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
Standard quantity [pcs]
Type
L
W
T
e
Paper tape
Embossed tape
0.3±0.03
0.5±0.05
P
V
□MK105
1.0±0.05
0.5±0.05
0.25±0.10
0.35±0.25
10000
-
(0402 inch)
□MK107
(0603 inch)
1.6±0.10
2.0±0.10
3.2±0.15
0.8±0.10
1.25±0.10
1.6±0.15
0.8±0.10
A
4000
-
0.85±0.10
1.25±0.10
1.15±0.10
1.6±0.20
D
G
F
4000
-
□MK212
(0805 inch)
0.5±0.25
-
3000
3000
2000
□MK316
(1206 inch)
0.5+0.35/ー0.25
-
L
■ AVAILABLE CAPACITANCE RANGE
105
SD
107
SD
212
SD
316
SD
Type
Cap
[pF]
VDC
[3-digit]
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
50V
25V
16V
10V
6.3V
50V
25V
16V
10V
50V
35V
16V
10V
35V
25V
390
470
560
680
820
1000
1200
1500
1800
2200
2700
V
V
V
V
V
V
V
A
A
A
A
A
A
A
V
V
V
V
P
P
3300
3900
4700
V
V
V
A
A
D
D
D
D
D
D
5600
6800
8200
10000
12000
15000
18000
22000
27000
33000
39000
47000
56000
68000
82000
100000
A
A
A
A
A
A
A
A
D
D
G
G
G
D
F
F
D
F
F
F
L
L
G
G
G
※Letters in the table indicate thickness.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_e-01
22
■ REPRESENTATIVE PART NUMBERS
●105TYPE
・0.5mm thicknes(s V)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK105 SD391KV
UMK105 SD471KV
UMK105 SD561KV
TMK105 SD681KV
TMK105 SD821KV
TMK105 SD102KV
TMK105 SD122KV
EMK105 SD152KV
EMK105 SD182KV
EMK105 SD222KV
EMK105 SD272KV
LMK105 SD332KV
LMK105 SD392KV
LMK105 SD472KV
390
470
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
560
25V
16V
10V
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
Standard
type
・0.3mm thicknes(s P)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
10V
LMK105 SD152KP
JMK105 SD272KP
1500
2700
±10
±10
0.1
0.1
0.3±0.03
0.3±0.03
R
R
200%
200%
Standard
type
6.3V
Note:Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.
●107TYPE
HALT
Soldering
R:Reflow
W:Wave
Internal
code
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
(P/N 1)
50V
UMK107 SD102KA
UMK107 SD122KA
UMK107 SD152KA
UMK107 SD182KA
UMK107 SD222KA
UMK107 SD272KA
UMK107 SD332KA
TMK107 SD392KA
TMK107 SD472KA
EMK107 SD562KA
EMK107 SD682KA
EMK107 SD822KA
EMK107 SD103KA
LMK107 SD123KA
LMK107 SD153KA
LMK107 SD183KA
LMK107 SD223KA
1000
1200
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
1500
1800
2200
2700
3300
3900
4700
25V
16V
Standard
type
5600
6800
8200
10000
12000
15000
18000
22000
10V
Note:Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.
●212TYPE
・1.25mm thicknes(s G)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
35V
10V
GMK212 SD183KG
GMK212 SD223KG
GMK212 SD273KG
LMK212 SD683KG
LMK212 SD823KG
LMK212 SD104KG
18000
22000
27000
68000
82000
100000
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
Standard
type
・0.85mm thicknes(s D)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔pF〕
tolerance
50V
UMK212 SD392KD
UMK212 SD472KD
UMK212 SD562KD
UMK212 SD682KD
UMK212 SD822KD
UMK212 SD103KD
GMK212 SD123KD
GMK212 SD153KD
EMK212 SD333KD
LMK212 SD473KD
3900
4700
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
5600
6800
8200
Standard
type
10000
12000
15000
33000
47000
35V
16V
10V
Note:Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_e-01
23
■ REPRESENTATIVE PART NUMBERS
●316TYPE
・1.6mm thicknes(s L)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
Thickness
〔mm〕
Part number 1
Part number 2
Part number 2
Note
Note
% Rated
voltage
〔pF〕
tolerance
〔%〕
TMK316 SD823KL
TMK316 SD104KL
82000
±10
±10
0.1
0.1
1.6±0.2
1.6±0.2
R
R
200%
200%
Standard
type
25V
100000
・1.15mm thicknes(s F)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
% Rated
voltage
〔pF〕
tolerance
GMK316 SD333KF
GMK316 SD393KF
TMK316 SD473KF
TMK316 SD563KF
TMK316 SD683KF
33000
39000
47000
56000
68000
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
R
R
R
R
R
200%
200%
200%
200%
200%
35V
Standard
type
25V
Note:Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels.
■ ELECTRICAL CHARACTERISTICS
Capacitance-temperature characteristics
■
20
15
SD : Standard Type
10
5
0
-
5
-
10
-
15
-
20
-
60
-
-
40 20
0
20
40 60
80 100 120
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_e-01
24
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_e-01
25
■ RELIABILITY DATA
Multilayer Ceramic Capacitors and Medium-High Voltage Multilayer Ceramic
Capacitors are noted separately.
Super Low Distortion Multilayer Ceramic Capacitors(CFCAP)
1. Operating Temperature Range
Specified Value
-55 to +125℃
2. Storage Temperature Range
Specified Value
-55 to +125℃
3. Rated Voltage
Specified Value
6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC
No breakdown or damage
4. Dielectric Withstanding Voltage(Between terminals)
Specified Value
【Test Methods and Remarks】
Applied voltage: Rated voltage×3
Duration: 1 to 5 sec.
Charge/discharge current: 50mA max.
5.Insulation Resistance
Specified Value
10000 MΩ or 500MΩμF, whichever is smaller
【Test Methods and Remarks】
Applied voltage: Rated voltage
Duration: 60±5 sec.
Charge/discharge current: 50mA max.
6.Capacitance(Tolerance)
Specified Value
±10%
【Test Methods and Remarks】
Measuring frequency:1kHz±10%
Measuring voltage:1±0.2Vrms
Bias application: None
7.Dissipation Factor
Specified Value
0.1%max
【Test Methods and Remarks】
Measuring frequency:1kHz±10%
Measuring voltage:1±0.2Vrms
Bias application: None
8.Bending Strength
Appearance: No abnormality
Capacitance change: ±5%
Specified Value
【Test Methods and Remarks】
Warp: 1mm
Speed: 0.5mm/second
Duration:10 seconds
R-230
Test board: glass epoxy resin substrate
Thickness: 1.6mm
Capacitance measurement shall be conducted with the board bent.
ꢀ
9.Adhesive Force of Terminal Electrodes
Specified Value
Terminal electrodes shall be no exfoliation or a sign of exfoliation.
【Test Methods and Remarks】
Applied force: 5N
Duration: 30 ±5 seconds
10.Solderability
Specified Value
At least 95% of terminal electrode is covered by new solder.
【Test Methods and Remarks】
Solder type
H60A or H63A
Solder temperature
Duration
Eutectic solder
230±5℃
245±3℃
4±1 sec.
Lead-free solder Snー3.0Agー0.5Cu
11.Resistance to Soldering Heat
Appearance: No abnormality
Capacitance change: ±2.5% max.
Dissipation factor : Initial value
Specified Value
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
【Test Methods and Remarks】
Solder temp.: 270 ±5℃
Duration: 3 ±0.5 sec.
Preheating conditions:80 to 100℃, 2 to 5 min. or 5 to 10 min.
150 to 200℃, 2 to 5 min. or 5 to 10 min.
Measurement shall be conducted : 24±2hrs under the standard condition
Note1
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_reli_e-01
mlcc05_reli-R1
■ RELIABILITY DATA
12.Temperature Cycle(Thermal Shock)
Appearance: No abnormality
Capacitance change: ±2.5% max
Dissipation factor : Initial value
Specified Value
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
【Test Methods and Remarks】
+0
Conditions for 1 cycle/ Step 1: Minimum operating temperature
℃
30±3 min.
-3
Step 2: Normal temperature
Step 3: Maximum operating temperature
Step 4: Normal temperature
2 to 3 min.
+0
-3
℃
30±3 min.
2 to 3 min.
Number of cycles: 5 times
Measurement shall be conducted : 24±2hrs under the standard condition
Note1
13.Humidity(Steady state)
Appearance: No abnormality
Capacitance change: ±5% max
Dissipation factor : 0.5% max
Specified Value
Insulation resistance 50MΩμF or 1000MΩ, whichever is smaller
【Test Methods and Remarks】
Temperature:40±2℃
Humidity:90 to 95% RH
+24
Duration:500
hrs
-0
Measurement shall be conducted : 24 ±2hrs under the standard condition
Note1
14.Humidity Loading
Appearance: No abnormality
Capacitance change: ±7.5% max
Dissipation factor : 0.5% max
Specified Value
Insulation resistance: 25MΩμF or 500MΩ, whichever is smaller
【Test Methods and Remarks】
According to JIS C 5102 clause 9.9.
Temperature:40±2℃ꢀHumidity:90 to 95% RH
+24
Duration:500
hrs
-0
Applied voltage: Rated voltage
Charge/discharge current:50mA max
Measurement shall be conducted : 24 ±2hrs under the standard condition
Note1
15.High Temperature Loading
Appearance: No abnormality
Capacitance change: ±3% max
Dissipation factor : 0.35% max
Specified Value
Insulation resistance: 50MΩμF or 1000MΩ, whichever is smaller
【Test Methods and Remarks】
According to JIS C 5102 clause 9.10.
Temperature:125±3℃
+48
Duration:1000
hrs
-0
Applied voltage: Rated voltage x 2
Charge/discharge current:50mA max
Measurement shall be conducted : 24 ±2hrs under the standard condition Note1
Note1
Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_reli_e-01
mlcc05_reli-R2
MEDIUM-HIGH VOLTAGE MULTILAYER CERAMIC CAPACITORS
REFLOW
■ FEATURES
■ APPLICATIONS
◦ꢀThe use of nickel as electrode material prevents migration and pro-
◦Gꢀ eneral telephone exchange
◦Iꢀnverter
vides high reliability.
◦ꢀSmall case sizes with high rated voltage.
◦Wꢀ ireless and Telecommunication base
◦Fꢀ or DC/DC Converter
■ PART NUMBER
H M K 3 1 6 △ B J 1 0 4 K L - T △
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬
❻Temperature
❹Dimension
⓬Internal code
Standard
△=Blank space
❾Thickness
〔mm〕
❿Special code
❶Rated
❽Special code
❸End
characteristics code
voltage〔VDC〕
Type (inch) L×W[mm]
107 (0603) 1.6×0.8
212 (0805) 2.0×1.25
316 (1206) 3.2×1.6
325 (1210) 3.2×2.5
432 (1812) 4.5×3.2
termination
Plated
△
-
Standard
K
±10%
±20%
B
X5R
BJ
A
0.8
0.85
1.25
1.15
1.6
H
Q
S
100
250
630
K
M
D
G
F
C7
B7
X7S
X7R
⓫Packaging
❷Series name
Multilayer ceramic
capacitor
φ178mm Taping
(4mm pitch)
T
❼Nominal
capacitance〔pF〕
M
❺Dimension
tolerance
L
N
M
1.9
example
104
105
△
Standard
2.5
100,000
△=Blank space
1,000,000
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
Standard quantity [pcs]
Paper tape Embossed tape
Type
L
W
T
e
□MK107
1.6±0.10
0.8±0.10
1.25±0.10
1.6±0.15
2.5±0.20
3.2±0.30
0.8±0.10
A
0.35±0.25
0.5±0.25
4000
-
(0603 inch)
0.85±0.10
1.25±0.10
1.15±0.10
1.6±0.20
1.15±0.10
1.9±0.20
D
G
F
4000
-
□MK212
(0805 inch)
2.0±0.10
3.2±0.15
3.2±0.3
4.5±0.4
-
3000
3000
2000
□MK316
(1206 inch)
0.5 +0.35/ー0.25
0.6±0.3
-
-
-
L
F
□MK325
(1210 inch)
2000
500
N
□MK432
(1812 inch)
2.5±0.20
M
0.9±0.6
■ AVAILABLE CAPACITANCE RANGE
107
212
316
325
432
Type
X7R X7S B/X5R
X7R
B/X5R
X7R
B/X5R
X7R
B/X5R
X7R
B/X5R
Cap
[μF]
VDC
[3-digit]
102
152
222
332
472
682
103
153
223
333
473
683
104
154
224
334
474
100 100 100 100 250 100 250 100 250 630 100 250 630 100 250 630 100 250 630 100 250 630 100 250 630
0.001
0.0015
0.0022
0.0033
0.0047
0.0068
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
D
D
D
D
G
G
G
G
G
D
D
D
D
G
G
G
G
G
F
F
F
F
F
F
F
L
L
F
F
F
F
F
F
F
L
L
G
G
G
G
G
G
G
G
G
G
G
G
G
G
N
N
N
N
N
N
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
N
N
M
M
M
M
M
M
A
A
F
N
N
N
N
N
N
N
N
N
F
N
N
N
N
N
N
N
N
N
M
M
G
G
M
M
M
M
M
M
M
M
684
105
155
225
L
L
M
M
M
M
M
M
N
N
※Letters in the table indicate thickness.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_e-01
26
■ AVAILABLE CAPACITANCE RANGE
Temperature characteristics
Temperature range〔℃〕
-25~+85
Capacitance tolerance
Temp.char.Code
〔%〕
Applicable standard
Ref. Temp〔. ℃〕
Capacitance chang〔e %〕
JIS
B
20
25
25
25
±10
±15
±22
±15
BJ
EIA
X5R
X7S
X7R
-55~+85
-55~+125
-55~+125
±10(K)
±20(M)
C7
B7
EIA
EIA
■ REPRESENTATIVE PART NUMBERS
●107TYPE
【Temperature Characteristic BJ:B/X5R】
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
100V
HMK107 BJ102□A
HMK107 BJ152□A
HMK107 BJ222□A
HMK107 BJ332□A
HMK107 BJ472□A
HMK107 BJ682□A
HMK107 BJ103□A
HMK107 BJ153□A
HMK107 BJ223□A
HMK107 BJ333□A
HMK107 BJ104□A
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
1000
1500
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
2200
3300
4700
6800
10000
15000
22000
33000
100000
Capacitance tolerance code is applied to □ of part number.
*1ꢁWe may provide X7R for some itemes according to the individual specification.
【Temperature CharacteristicꢁB7:X7R, C7:X7S】
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
100V
HMK107 B7102□A
HMK107 B7152□A
HMK107 B7222□A
HMK107 B7332□A
HMK107 B7472□A
HMK107 B7682□A
HMK107 B7103□A
HMK107 B7153□A
HMK107 B7223□A
HMK107 B7333□A
HMK107 C7104□A
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
1000
1500
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
0.8±0.1
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
2200
3300
4700
6800
10000
15000
22000
33000
100000
Capacitance tolerance code is applied to □ of part number.
●212TYPE
【Temperature CharacteristicꢁBJ:B/X5R】
・1.25mm thicknes(s G)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
100V
HMK212 BJ103□G
HMK212 BJ153□G
HMK212 BJ223□G
HMK212 BJ333□G
HMK212 BJ473□G
HMK212 BJ683□G
HMK212 BJ104□G
HMK212 BJ224□G
QMK212 BJ472□G
QMK212 BJ682□G
QMK212 BJ103□G
QMK212 BJ153□G
QMK212 BJ223□G
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
10000
15000
22000
33000
47000
68000
100000
220000
4700
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
150%
250V
6800
10000
15000
22000
・0.85mm thicknes(s D)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
250V
QMK212 BJ102□D
QMK212 BJ152□D
QMK212 BJ222□D
QMK212 BJ332□D
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
1000
1500
2200
3300
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
150%
150%
150%
150%
Capacitance tolerance code is applied to □ of part number.
*1ꢁWe may provide X7R for some itemes according to the individual specification.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_e-01
27
■ REPRESENTATIVE PART NUMBERS
【Temperature CharacteristicꢁB7:X7R】
・1.25mm thicknes(s G)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
100V
HMK212 B7103□G
HMK212 B7153□G
HMK212 B7223□G
HMK212 B7333□G
HMK212 B7473□G
HMK212 B7683□G
HMK212 B7104□G
HMK212 B7224□G
QMK212 B7472□G
QMK212 B7682□G
QMK212 B7103□G
QMK212 B7153□G
QMK212 B7223□G
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
10000
15000
22000
33000
47000
68000
100000
220000
4700
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
1.25±0.1
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
150%
250V
6800
10000
15000
22000
・0.85mm thicknes(s D)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
250V
QMK212 B7102□D
QMK212 B7152□D
QMK212 B7222□D
QMK212 B7332□D
X7R
X7R
X7R
X7R
1000
1500
2200
3300
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
150%
150%
150%
150%
Capacitance tolerance code is applied to □ of part number.
●316TYPE
【Temperature CharacteristicꢁBJ:B/X5R】
・1.6mm thicknes(s L)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
100V
HMK316 BJ473□L
HMK316 BJ683□L
HMK316 BJ104□L
HMK316 BJ154□L
HMK316 BJ224□L
HMK316 BJ334□L
HMK316 BJ474□L
HMK316 BJ105□L
QMK316 BJ333□L
QMK316 BJ473□L
QMK316 BJ683□L
QMK316 BJ104□L
SMK316 BJ153□L
SMK316 BJ223□L
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
47000
68000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
100000
150000
220000
330000
470000
1000000
33000
250V
630V
47000
68000
100000
15000
22000
・1.15mm thicknes(s F)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
630V
SMK316 BJ102□F
SMK316 BJ152□F
SMK316 BJ222□F
SMK316 BJ332□F
SMK316 BJ472□F
SMK316 BJ682□F
SMK316 BJ103□F
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
1000
1500
2200
3300
4700
6800
10000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
R
R
R
R
R
R
R
120%
120%
120%
120%
120%
120%
120%
Capacitance tolerance code is applied to □ of part number.
*1ꢁWe may provide X7R for some itemes according to the individual specification.
【Temperature CharacteristicꢁB7:X7R】
・1.6mm thicknes(s L)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
100V
HMK316 B7473□L
HMK316 B7683□L
HMK316 B7104□L
HMK316 B7154□L
HMK316 B7224□L
HMK316 B7334□L
HMK316 B7474□L
HMK316 B7105□L
QMK316 B7333□L
QMK316 B7473□L
QMK316 B7683□L
QMK316 B7104□L
SMK316 B7153□L
SMK316 B7223□L
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
47000
68000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
1.6±0.2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
100000
150000
220000
330000
470000
1000000
33000
250V
630V
47000
68000
100000
15000
22000
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_e-01
28
■ REPRESENTATIVE PART NUMBERS
・1.15mm thicknes(s F)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
630V
SMK316 B7102□F
SMK316 B7152□F
SMK316 B7222□F
SMK316 B7332□F
SMK316 B7472□F
SMK316 B7682□F
SMK316 B7103□F
X7R
X7R
X7R
X7R
X7R
X7R
X7R
1000
1500
2200
3300
4700
6800
10000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
1.15±0.1
R
R
R
R
R
R
R
120%
120%
120%
120%
120%
120%
120%
Capacitance tolerance code is applied to □ of part number.
●325TYPE
【Temperature CharacteristicꢁBJ:B/X5R】
・1.9mm thicknes(s N)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
100V
HMK325 BJ154□N
HMK325 BJ224□N
HMK325 BJ334□N
HMK325 BJ474□N
HMK325 BJ684□N
HMK325 BJ105□N
HMK325 BJ225□N
QMK325 BJ473□N
QMK325 BJ104□N
QMK325 BJ154□N
QMK325 BJ224□N
SMK325 BJ223□N
SMK325 BJ333□N
SMK325 BJ473□N
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
150000
220000
330000
470000
680000
1000000
2200000
47000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
120%
250V
630V
100000
150000
220000
22000
33000
47000
・1.15mm thicknes(s F)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
Thickness
〔mm〕
Part number 1
HMK325 BJ104□F
Part number 2
Note
% Rated
voltage
〔%〕
100V
B/X5R*1
100000
±10, ±20
3.5
1.15±0.1
R
200%
Capacitance tolerance code is applied to □ of part number.
*1ꢁWe may provide X7R for some itemes according to the individual specification.
【Temperature CharacteristicꢁB7:X7R】
・1.9mm thicknes(s N)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
100V
HMK325 B7154□N
HMK325 B7224□N
HMK325 B7334□N
HMK325 B7474□N
HMK325 B7684□N
HMK325 B7105□N
HMK325 B7225□N
QMK325 B7473□N
QMK325 B7104□N
QMK325 B7154□N
QMK325 B7224□N
SMK325 B7223□N
SMK325 B7333□N
SMK325 B7473□N
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
150000
220000
330000
470000
680000
1000000
2200000
47000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
1.9±0.2
R
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
120%
250V
630V
100000
150000
220000
22000
33000
47000
・1.15mm thicknes(s F)
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
100V
HMK325 B7104□F
X7R
100000
±10, ±20
3.5
1.15±0.1
R
200%
Capacitance tolerance code is applied to □ of part number.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_e-01
29
■ REPRESENTATIVE PART NUMBERS
●432TYPE
【Temperature CharacteristicꢁBJ:B/X5R】
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
100V
HMK432 BJ474□M
HMK432 BJ105□M
HMK432 BJ155□M
HMK432 BJ225□M
QMK432 BJ104□M
QMK432 BJ224□M
QMK432 BJ334□M
QMK432 BJ474□M
SMK432 BJ473□M
SMK432 BJ683□M
SMK432 BJ104□M
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
470000
1000000
1500000
2200000
100000
220000
330000
470000
47000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
120%
250V
630V
68000
100000
Capacitance tolerance code is applied to □ of part number.
*1ꢁWe may provide X7R for some itemes according to the individual specification.
【Temperature CharacteristicꢁB7:X7R】
HALT
Capacitance
tolerance
〔%〕
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance
〔pF〕
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
100V
250V
630V
HMK432 B7474□M
HMK432 B7105□M
HMK432 B7155□M
HMK432 B7225□M
QMK432 B7104□M
QMK432 B7224□M
QMK432 B7334□M
QMK432 B7474□M
SMK432 B7473□M
SMK432 B7683□M
SMK432 B7104□M
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
470000
1000000
1500000
2200000
100000
220000
330000
470000
47000
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
2.5±0.2
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
150%
150%
150%
150%
120%
120%
120%
68000
100000
Capacitance tolerance code is applied to □ of part number.
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
Taiyo Yuden medium-high voltage ceramic capacitor
■
HMK212 BJ104KG / HMK212 B7104KG
SMK316 BJ223KL / SMK316 B7223KL
QMK325 BJ224KN / QMK325 B7224KN
HMK325 BJ105KN / HMK325 B7105KN
SMK432 BJ104KM / SMK432 B7104KM
QMK432 BJ474KM / QMK432 B7474KM
●Temperature characteristics
HMK325 BJ105KN / HMK325 B7105KN
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_e-01
30
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_e-01
31
■ RELIABILITY DATA
Multilayer Ceramic Capacitors and Super Low Distortion Multilayer Ceramic
Capacitors are noted separately.
MediumーHigh Voltage Multilayer Ceramic Capacitor
1. Operating Temperature Range
Specified Value
X7R, X7S:-55~+125℃ X5R:-55~+85℃ B:-25~+85℃
2. Storage Temperature Range
Specified Value
X7R, X7S:-55~+125℃ X5R:-55~+85℃ B:-25~+85℃
100VDC, 250VDC, 630VDC
3. Rated Voltage
Specified Value
4. Withstanding Voltage(Between terminals)
Specified Value
No breakdown or damage
【Test Methods and Remarks】
Applied voltage:Rated voltage×2.5(HMK), Rated voltage×2(QMK), Rated voltage×1.2(SMK)
Duration:1 to 5sec.
Charge/discharge current:50mA max.
5.Insulation Resistance
Specified Value
100MΩμF or 10GΩ, whichever is smaller.
【Test Methods and Remarks】
Applied voltage:Rated voltage(HMK, QMK), 500V(SMK)
Duration:60±5sec.
Charge/discharge current:50mA max.
6.Capacitance(Tolerance)
Specified Value
±10%、±20%
【Test Methods and Remarks】
Measuring frequency:1kHz±10%
Measuring voltage:1±0.2Vrms
Bias application:None
7.Dissipation Factor
3.5%ma(x HMK)
2.5%ma(x QMK, SMK)
Specified Value
【Test Methods and Remarks】
Measuring frequency:1kHz±10%
Measuring voltage:1±0.2Vrms
Bias application:None
8.Temperature Characteristic of Capacitance
Specified Value
B: ±10%(-25~+85℃)
X5R:±15%(-55~+85℃)
X7R:±15%(-55~+125℃)
X7S:±22%(-55~+125℃)
【Test Methods and Remarks】
Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.
(C-C2)
Step
B
X5R、X7R、X7S
Minimum operating temperature
20℃ 25℃
Maximum operating temperature
×100(%)
ꢁC2
1
2
3
C
:Capacitance value in Step 1 or Step 3
C2 :Capacitance value in Step 2
9.Deflection
Appearance:No abnormality
Capacitance change:Within±10%
Specified Value
【Test Methods and Remarks】
Warp:1mm
Duration:10sec.
R-230
Test board:glass epoxy-resin substrate
Thickness:1.6mm
Capacitance measurement shall be conducted with the board bent.
10.Adhesive Strength of Terminal Electrodes
Specified Value
No terminal separation or its indication.
【Test Methods and Remarks】
Applied force:5N
Duration:30±5sec.
ꢁꢁꢁ
11.Solderability
Specified Value
At least 95% of terminal electrode is covered by new solder
【Test Methods and Remarks】
Solder type
H60A or H63A
Lead-free solder Snー3.0Agー0.5Cu
Solder temperature
Duration
Eutectic solder
230±5℃
245±3℃
4±1 sec.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_reli_e-01
mlcc06_reli-R1
■ RELIABILITY DATA
12.Resistance to Soldering
Appearance:
No abnormality
Capacitance change:
Dissipation factor :
Insulation resistance:
Within±15%(HMK), ±10%(QMK, SMK)
Initial value
Initial value
Specified Value
Withstanding voltage(between terminals): No abnormality
【Test Methods and Remarks】
Preconditioning:Thermal treatmen(t at 150℃ for 1hr) Note1
Solder temperature:270±5℃
Duration:3±0.5sec.
Preheating conditions: 80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5min.
Recovery : 24±2hrs under the standard condition Note3
13.Temperature Cycle(Thermal Shock)
Appearance:
Capacitance change: Within±15%(HMK), ±7.5%(QMK, SMK)
Dissipation factor: Initial value
No abnormality
Specified Value
Insulation resistance: Initial value
【Test Methods and Remarks】
Preconditioning:Thermal treatmen(t at 150℃ for 1hr) Note1
+0
Conditions for 1 cycle/ Step 1: Minimum operating temperature
℃ 30±3min.
-3
Step 2: Normal temperature
Step 3: Maximum operating temperature
Step 4: Normal temperature
2 to 3min.
+0
-3
℃ 30±3min.
2 to 3min.
Number of cycles:5 times
Recovery : 24±2hrs under the standard condition Note3
14.Humidit(y Steady state)
Appearance:
No abnormality
Capacitance change: Within±15%
Specified Value
Dissipation factor :
7%ma(x HMK), 5%ma(x QMK, SMK).
Insulation resistance: 25MΩμF or 1000MΩ, whichever is smaller.
【Test Methods and Remarks】
Preconditioning:Thermal treatmen(t at 150℃ for 1hr) Note1
Temperature:40±2℃
Humidity:90 to 95%RH
+24
Duration: 500
hrs
-0
Recovery : 24±2hrs under the standard condition Note3
15.Humidity Loading
Appearance:
No abnormality
Capacitance change: Within±15%
Specified Value
Dissipation factor:
7%ma(x HMK), 5%ma(x QMK, SMK).
Insulation resistance: 10MΩμF or 500MΩ, whichever is smaller.
【Test Methods and Remarks】
According to JIS 5102 clause 9.9.
Preconditioning:Voltage treatment Note2
Temperature:40±2℃
Humidity:90 to 95%RH
Applied voltage:Rated voltage
Charge/discharge current:50mA max.
Duration: 500 -+204 hrs
Recovery : 24±2hrs under the standard condition Note3
16.High Temperature Loading
Appearance:
No abnormality
Capacitance change: Within±15%
Specified Value
Dissipation factor:
7%ma(x HMK), 5%ma(x QMK, SMK).
Insulation resistance: 50MΩμF or 1000MΩ, whichever is smaller.
【Test Methods and Remarks】
According to JIS 5102 clause 9.10.
Preconditioning:Voltage treatment Note2
Temperature:125±3℃(B7, C7), 85±2℃(BJ)
Applied voltage:Rated voltage×2(HMK)
Rated voltage×1.5(QMK)
Rated voltage×1.2(SMK)
Charge/discharge current:50mA max.
+24
Duration: 1000
hrs
-0
Recovery : 24±2hrs under the standard condition Note3
Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150+0/-10℃ for an hour and kept at room temperature for 24±2hours.
Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and
kept at room temperature for 24±2hours.
Note3 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condi-
tion.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc06_reli_e-01
mlcc06_reli-R2
LW REVERSAL DECOUPLING CAPACITORS( )
LWDCTM
REFLOW
■ FEATURES
■ APPLICATIONS
◦ꢀLow equivalent series resistance(ESR).
◦ꢀLow equivalent series inductor(ESL).
◦ꢀThe effect of noise removal in the high frequency.
◦ꢀDecreased ripple voltage.
◦Dꢀ ecoupling capacitors
◦Fꢀ iltering capacitors
◦ꢀSmall size with high capacitance.
■ PART NUMBER
J W K 2 1 2 △ B J 1 0 6 M D - T △
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬
⓬Internal code
❿Special code
Standard
❽Capacitance
❾Thickness
〔mm〕
❹Dimension
❶Rated
❸End
❻Temperature
characteristics
code
tolerance
voltage〔VDC〕
A
termination
△
Standard
-
Type (inch) L×W〔mm〕
105 (0204) 0.52×1.0
107 (0306) 0.8×1.6
212 (0508) 1.25×2.0
K
±10%
±20%
P
0.3
4
K
Plated
△=Blank space
B
BJ
M
V
0.5
J
6.3
10
16
25
⓫Packaging
X5R
D
0.85
L
E
T
φ178mm Taping
(2mm pitch)
0204 Type
C6
C7
B7
X6S
X7S
X7R
❼Nominal capacitance
〔μF〕
example
F
T
❷Series name
LW Reverse Type
❺Dimension tolerance
Taping
W
△
Standard
φ178mm
105
106
1.0
pitch
(4mm
)
△=Blank space
10.0
0306, 0508
Type
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
W
Standard quantity [pcs]
Type
L
T
Paper tape
Embossed tape
□WK105
0.52±0.05
1.00±0.05
1.60±0.10
2.00±0.15
0.30±0.05
0.50±0.05
0.85±0.10
P
10000
-
(0204 inch)
□WK107
(0306 inch)
□WK212
(0508 inch)
0.80±0.10
1.25±0.15
V
-
4000
D
4000
-
■ AVAILABLE CAPACITANCE RANGE
105
107
212
Type
X7S
6.3
X6S
6.3
X5R
10
X7R
16
X7S
X6S
4
X5R
X6S
X5R
6.3
Cap
[μF]
VDC
[3-digit]
104
10
P
4
16
P
10
P
4
25
P
16
P
6.3
P
4
25
V
6.3
4
V
25
V
16
10
6.3 6.3
4
10
0.10
0.22
0.47
1.0
P
P
224
P
P
V
V
V
V
474
P
P
P
P
P
P
105
V
V
V
V
V
2.2
4.7
225
475
V
V
D
D
D
D
10
106
22
226
D
D
※Letters in the table indicate thickness.
Temperature characteristics
Temperature range〔℃〕
-25~+85
Capacitance tolerance
Temp.char.Code
〔%〕
Applicable standard
Ref. Temp〔. ℃〕
Capacitance change〔%〕
JIS
B
20
25
25
25
25
±10
±15
±22
±22
±15
BJ
EIA
X5R
X6S
X7S
X7R
-55~+85
-55~+105
-55~+125
-55~+125
±10(K)
±20(M)
C6
C7
B7
EIA
EIA
EIA
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc07_e-01
32
■ REPRESENTATIVE PART NUMBERS
●105TYPE(0204 case size)
【Temperature Characteristic BJ:X5R】
・0.3mm thicknes(s P)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
25V
16V
10V
6.3V
TWK105 BJ104MP
EWK105 BJ224MP
LWK105 BJ474MP
JWK105 BJ104MP
JWK105 BJ474MP
JWK105 BJ105MP
AWK105 BJ224MP
X5R
X5R
0.1
0.22
0.47
0.1
±20
±20
±20
±20
±20
±20
±20
5
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
R
R
R
R
R
R
R
150%
150%
150%
150%
150%
150%
150%
10
10
5
X5R
X5R*1
X5R*1
X5R
0.47
1
10
10
10
4V
X5R*1
0.22
*1ꢁWe may provide X6S/X7S for some itemes according to the individual specification.
【Temperature Characteristic C6:X6S C7:X7S】
・0.3mm thicknes(s P)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
16V
10V
EWK105 C6104MP
LWK105 C7104MP
LWK105 C6224MP
JWK105 C7104MP
JWK105 C7224MP
JWK105 C6474MP
AWK105 C6224MP
AWK105 C6474MP
AWK105 C6105MP
X6S
X7S
X6S
X7S
X7S
X6S
X6S
X6S
X6S
0.1
0.1
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
R
R
R
R
R
R
R
R
R
150%
150%
150%
150%
150%
150%
150%
150%
150%
10
10
5
0.22
0.1
6.3V
4V
0.22
0.47
0.22
0.47
1
10
10
10
10
10
●107TYPE(0306 case size)
【Temperature Characteristic BJ:X5R】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
voltage
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
25V
16V
TWK107 BJ104MV
EWK107 BJ224MV
EWK107 BJ474MV
LWK107 BJ105MV
LWK107 BJ225MV
JWK107 BJ105MV
JWK107 BJ225MV
JWK107 BJ475MV
X5R
X5R
X5R
X5R
X5R
X5R*1
X5R
X5R
0.1
0.22
0.47
1
±20
±20
±20
±20
±20
±20
±20
±20
5
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
R
R
150%
150%
150%
150%
150%
150%
150%
150%
5
5
10V
10
10
10
10
10
2.2
1
6.3V
2.2
4.7
*1ꢁWe may provide X7R/X7S for some itemes according to the individual specification.
【Temperature Characteristic B7:X7R C7:X7S C6:X6S】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
25V
16V
TWK107 B7104MV
EWK107 B7224MV
EWK107 B7474MV
JWK107 C7105MV
AWK107 C7225MV
AWK107 C6475MV
X7R
X7R
X7R
X7S
X7S
X6S
0.1
0.22
0.47
1
±20
±20
±20
±20
±20
±20
5
5
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
R
R
R
R
R
R
150%
150%
150%
150%
150%
150%
5
6.3V
4V
10
10
10
2.2
4.7
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc07_e-01
33
■ REPRESENTATIVE PART NUMBERS
●212TYPE(0508 case size)
【Temperature Characteristic BJ:X5R】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
10V
LWK212 BJ475□D
LWK212 BJ106MD
JWK212 BJ226MD
X5R
X5R
X5R
4.7
10
±10, ±20
±20
±20
10
10
10
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
150%
150%
150%
6.3V
22
Capacitance tolerance code is applied to □ of part number.
【Temperature Characteristic C6:X6S】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
6.3V
JWK212 C6475□D
JWK212 C6106MD
AWK212 C6226MD
X6S
X6S
X6S
4.7
10
±10, ±20
±20
±20
10
10
10
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
150%
150%
150%
4V
22
Capacitance tolerance code is applied to □ of part number.
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
Taiyo Yuden multilayer ceramic capacitor
■
JWK105 BJ105MP
JWK107 BJ475MV
JWK212 BJ226MD
Z
Z
Z
M
M
M
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc07_e-01
34
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc07_e-01
35
ARRAY TYPE MULTILAYER CERAMIC CAPACITORS
REFLOW
■ FEATURES
■ APPLICATIONS
◦ꢀHigh density and high efficiency mounting.
◦Gꢀ eneral electronic equipment
◦ꢀInternal electrodes are composed of nickel for improved cost perfor-
mance and reliability.
◦Cꢀ ommunication equipment (cellular phone, wireless applications,
etc.)
■ PART NUMBER
E 4 K 2 1 2 △ B J 1 0 4 M D - T △
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
⓫
⓬
❿Special code
⓬Internal code
Standard
△=Blank space
❾Thickness
〔mm〕
❽Capacitance
❸End
❻Temperature
characteristics
code
❶Rated
❹Dimension
tolerance
termination
Plated
-
Standard
△
voltage〔VDC〕
A
Type (inch) L×W[mm]
096 (0302) 0.9×0.6
110 (0504) 1.37×1.0
212 (0805) 2.0×1.25
P
0.3
0.45
0.5
F
K
±1pF
±10%
±20%
K
4
B
BJ
K
V
B
A
D
J
6.3
10
16
25
50
⓫Packaging
X5R
M
L
E
T
U
φ178mm Taping
(4mm pitch)
0504, 0805 Type
B7
X7R
CH
C0H
0.6
❼Nominal capacitance
〔pF〕
example
T
F
0.8
❷Series name
2 circuits
multilayer capacitor
❺Dimension tolerance
CH
0.85
Taping
△
Standard
φ178mm
2
4
pitch
(2mm
)
104
105
100,000
△=Blank space
4 circuits
multilayer capacitor
0302 Type
1,000,000
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Dimension [mm]
E2
Standard quantity [pcs]
E2
W
L
Type
Embossed
Paper tape
L
W
E1
P
T
tape
T
P
K
V
B
A
0.30±0.03
0.45±0.05
0.50±0.05
0.60±0.06
0.80±0.08
□2K096
0.9±0.05
0.6±0.05
0.23±0.10
0.36±0.10
0.125±0.075
0.45±0.05
0.64±0.10
10000
4000
-
-
(0302 inch)
E1
□2K110
(0504 inch)
P
1.37±0.07
1.00±0.08
0.2±0.10
W
□2K212
L
E2
T
2.00±0.10
2.00±0.10
1.25±0.10
1.25±0.10
0.50±0.20
0.25±0.10
0.25±0.15
0.25±0.15
1.00±0.10
0.50±0.10
D
D
0.85±0.10
0.85±0.10
4000
4000
-
-
(0805 inch)
□4K212
(0805 inch)
E1
P
■ AVAILABLE CAPACITANCE RANGE
BJ/B7
CH
096ꢁ2 circuits
110ꢁ2 circuits
212ꢁ2 circuits
212ꢁ4circuits
□4K212
096
110
□2K096
□2K110
□2K212
2 circuits 2 circuits
□2K096 □2K110
CH
Type
Type
Cap
[μF]
B/X5R
X5R
X7R
B/X5R
X5R
B/X5R X5R X7R
B/X5R
X5R
Cap
[pF]
CH
VDC
[3-digit]
102
10V 6.3V 4V 50V 25V 16V 50V 25V 16V 10V 16V 10V 6.3V 25V 10V 16V 25V 16V 10V 10V
VDC
[3-digit]
100
25V
50V
0.001
0.0022
0.0047
0.01
B
B
B
B
B
B
10
12
15
18
22
27
33
39
47
56
68
82
100
P
P
P
P
P
P
P
P
P
P
P
P
P
B
B
B
B
B
B
B
B
B
B
B
B
B
222
120
472
150
103
P
B
B
B
B
180
0.022
0.047
0.1
223
220
473
K
K
K
K
B
B
B
B
270
104
B
D
D
D
330
0.22
224
B
A
D
D
390
0.47
474
470
1.0
105
K
A
A,V
V
A
D
D
560
2.2
225
D
680
※Letters in the table indicate thickness.
820
101
※Letters in the table indicate thickness.
Temperature characteristics
Capacitance tolerance
Temp.char.Code
〔%〕
Applicable standard
Temperature range〔℃〕
-25~+85
Ref. Temp〔. ℃〕
Capacitance change
±10[%]
±15[%]
±15[%]
±60[ppm/℃]
±60[ppm/℃]
JIS
EIA
EIA
JIS
EIA
B
20
25
25
20
25
BJ
B7
CH
±10(K)
±20(M)
X5R
X7R
CH
-55~+85
-55~+125
-55~+125
-55~+125
±10(K)
C0H
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc08_e-01
36
■ REPRESENTATIVE PART NUMBERS
●096TYPEꢁ2 circuits type
【Temperature CharacteristicꢁBJ:B/X5R】
・0.45mm thicknes(s K)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
6.3V
J2K096 BJ473□K
J2K096 BJ104□K
J2K096 BJ224MK
J2K096 BJ474MK
A2K096 BJ105MK
X5R
X5R
X5R
X5R
X5R
0.047
0.1
±10, ±20
±10, ±20
±20
±20
±20
5
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
R
R
R
R
R
150%
150%
150%
150%
150%
5
0.22
0.47
1
10
10
10
4V
・0.3mm thicknes(s P)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
Note
% Rated
voltage
〔μF〕
tolerance
10V
L2K096 BJ103□P
B/X5R
0.01
±10, ±20
5
0.3±0.03
R
200%
Capacitance tolerance code is applied to □ of part number.
【Temperature CharacteristicꢁCH:CH/C0H】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
〔pF〕
Thickness
〔mm〕
Part number 1
Part number 2
Q
% Rated
voltage
tolerance
25V
T2K096 CH100FP
T2K096 CH120KP
T2K096 CH150KP
T2K096 CH180KP
T2K096 CH220KP
T2K096 CH270KP
T2K096 CH330KP
T2K096 CH390KP
T2K096 CH470KP
T2K096 CH560KP
T2K096 CH680KP
T2K096 CH820KP
T2K096 CH101KP
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
10
12
15
18
22
27
33
39
47
56
68
82
100
±1pF
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
600
640
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
Capacitance tolerance code is applied to □ of part number.
●110TYPEꢁ2 circuits type
【Temperature CharacteristicꢁBJ:B/X5R】
・0.8mm thicknes(s A)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
16V
10V
E2K110 BJ105□A
L2K110 BJ474□A
L2K110 BJ105□A
J2K110 BJ225□A
X5R
B/X5R
X5R
1
0.47
1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
10
5
0.8±0.08
0.8±0.08
0.8±0.08
0.8±0.08
R
R
R
R
150%
200%
150%
150%
10
10
6.3V
X5R
2.2
・0.6mm thicknes(s B)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
50V
U2K110 BJ102□B
U2K110 BJ222□B
U2K110 BJ472□B
T2K110 BJ103□B
T2K110 BJ223□B
T2K110 BJ104□B
E2K110 BJ473□B
E2K110 BJ104□B
L2K110 BJ224□B
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R*1
B/X5R
B/X5R*1
B/X5R*1
B/X5R
0.001
0.0022
0.0047
0.01
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
5
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
25V
0.022
0.1
16V
10V
0.047
0.1
3.5
5
0.22
5
・0.5mm thicknes(s V)
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
10V
L2K110 BJ105MV
X5R
X5R
1
1
±20
±10, ±20
10
10
0.5±0.05
0.5±0.05
R
R
150%
150%
6.3V
J2K110 BJ105□V
Capacitance tolerance code is applied to □ of part number.
*1ꢁWe may provide X7R for some itemes according to the individual specification.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc08_e-01
37
■ REPRESENTATIVE PART NUMBERS
【Temperature CharacteristicꢁB7:X7R】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
50V
U2K110 B7102□B
U2K110 B7222□B
U2K110 B7472□B
T2K110 B7103□B
T2K110 B7223□B
E2K110 B7473□B
E2K110 B7104□B
X7R
X7R
X7R
X7R
X7R
X7R
X7R
0.001
0.0022
0.0047
0.01
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
3.5
3.5
3.5
3.5
3.5
3.5
5
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
25V
16V
0.022
0.047
0.1
Capacitance tolerance code is applied to □ of part number.
【Temperature CharacteristicꢁCH:CH/C0H】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
Thickness
〔mm〕
Part number 1
Part number 2
Q
Note
% Rated
voltage
〔pF〕
tolerance
50V
U2K110 CH100FB
U2K110 CH120KB
U2K110 CH150KB
U2K110 CH180KB
U2K110 CH220KB
U2K110 CH270KB
U2K110 CH330KB
U2K110 CH390KB
U2K110 CH470KB
U2K110 CH560KB
U2K110 CH680KB
U2K110 CH820KB
U2K110 CH101KB
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
10
12
15
18
22
27
33
39
47
56
68
82
100
±1pF
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
600
640
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
R
R
R
R
R
R
R
R
R
R
R
R
R
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
●212TYPEꢁ2 circuits type
【Temperature CharacteristicꢁBJ:B/X5R】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
25V
10V
T2K212 BJ105□D
L2K212 BJ225MD
B/X5R
X5R
1
±10, ±20
±20
5
0.85±0.1
0.85±0.1
R
R
200%
150%
2.2
10
Capacitance tolerance code is applied to □ of part number.
●212TYPEꢁ4 circuits type
【Temperature CharacteristicꢁBJ:B/X5R】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
25V
16V
10V
T4K212 BJ104□D
E4K212 BJ104□D
L4K212 BJ224□D
L4K212 BJ474□D
L4K212 BJ105□D
B/X5R
B/X5R*1
B/X5R
B/X5R
X5R
0.1
0.1
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
5
5
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
R
R
R
R
R
200%
200%
200%
200%
150%
0.22
0.47
1
5
5
10
Capacitance tolerance code is applied to □ of part number.
*1ꢁWe may provide X7R for some itemes according to the individual specification.
【Temperature CharacteristicꢁB7:X7R】
HALT
Soldering
R:Reflow
W:Wave
Internal
code
(P/N 1)
Rated
voltage
Temp.
char.
Capacitance Capacitance
tanδ
〔%〕
Thickness
〔mm〕
Part number 1
Part number 2
Note
% Rated
voltage
〔μF〕
tolerance
16V
E4K212 B7104□D
X7R
0.1
±10, ±20
5
0.85±0.1
R
200%
Capacitance tolerance code is applied to □ of part number.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc08_e-01
38
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
Taiyo Yuden multilayer ceramic capacitor
■
J2K096 BJ104MK
T2K096 CH100FP
T2K096 CH101KP
L2K096 BJ103MP
100000
10000
1000
100000
10000
1000
1000000
1000000
ESR
Impedance
ESR
Impedance
100000
10000
1000
100
100000
10000
1000
100
100
10
100
10
10
10
1
0.1
1
0.1
1
0.1
1
0.1
0.01
0.1
0.01
0.1
0.01
1
0.01
1
1
10
100 1000 10000100000
1
10
100 1000 10000100000
10
100
1000
10000
10
100
1000
10000
〔MHz〕
〔MHz〕
T2K110 BJ103MB / T2K110 B7103MB
E2K110 BJ104MB / E2K110 B7104MB
L2K110 BJ105MA
J2K110 BJ225MA
1000000
100000
10000
1000
100
100000
10000
1000
1000
10000
1000
100
10
100
10
1
100
10
1
10
1
0.1
1
0.1
0.1
0.01
0.1
0.01
0.01
0.01
0.001
0.1
0.001
0.1
0.001
0.1
0.001
0.1
1
10
100 1000 10000100000
1
10
100 1000 10000100000
1
10
100 1000 10000100000
1
10
100 1000 10000100000
L4K212 BJ105KD
10000
1000
100
10
1
0.1
0.01
0.001
0.1
1
10
100 1000 10000100000
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc08_e-01
39
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc08_e-01
40
■ PACKAGING
①Minimum Quantity
◦Taped package
③Representative taping dimensions
ꢁ◦Paper Tape(8mm wide)
ꢁ◦Pressed carrier tape(2mm pitch)
Thickness
mm
Standard quantity [pcs]
Type
Embossed
㧗0.1/−0
code
Paper tape
tape
□
MK042
0.2
0.3
C,D
P,T
P
—
15000
40000
□MK063
□2K096
□WK105
0.3
0.45
0.3
K
10000
P
0.2
C
20000
15000
—
T1
□MK105
□VK105
0.3
P
0.5
V, W
W
K
10000
0.5
Unit:mm
0.45
0.5
4000
Chip Cavity
Insertion Pitch
Tape Thickness
□MK107
□WK107
Type
V
—
4000
A
B
F
T
T1
0.8
A
□MK063
□2K096
0.37
0.67
0.5
V
0.65
1.02
0.45max.
0.42max.
□2K110
0.6
B
□WK105
2.0±0.05
4000
—
0.8
A
MK105(*1C)
MK105(*1P)
0.65
1.15
0.4max.
0.3max.
0.45
0.85
1.25
0.85
0.85
0.85
1.15
1.25
1.6
K
0.45max.
0.42max.
□MK212
□WK212
D
*
1 Thickness, C:0.2mm、P:0.3mm
G
D
—
3000
□4K212
□2K212
◦Punched carrier tape(2mm pitch)
D
4000
—
㧗0.1/−0
D
F
□MK316
3000
2000
G
L
—
0.85
1.15
1.9
D
F
□MK325
□MK432
N
—
—
2.0max
2.5
Y
M
M
500(T), 1000(P)
Unit:mm
Tape Thickness
2.5
500
Chip Cavity
Type
Insertion Pitch
A
B
F
T
□2K096
□MK105
□VK105
0.72
1.02
0.6max.
52.0±0.05
②Taping material
※No bottom tape for pressed carrier tape
0.65
1.15
0.8max.
◦Paper tape
◦Punched carrier tape(4mm pitch)
㧗0.1/−0
Unit:mm
Chip Cavity
Type
Insertion Pitch
F
Tape Thickness
T
◦Embossed tape
A
B
□MK107
□WK107
□2K110
1.0
1.15
1.8
1.1max.
1.0max.
1.55
□MK212
□WK212
□4K212
□2K212
4.0±0.1
1.65
2.0
2.4
3.6
1.1max.
□MK316
◦Chip filled
Note:Taping size might be different depending on the size of the product.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack_e-01
mlcc_pack-P1
■ PACKAGING
◦Embossed tape(4mm wide)
④Trailer and Leader
0.8±0.04
0.9±0.05
100mm or more
Trailer 160mm min.
Leader 400mm min.
1.0±0.02
2.0±0.04
F
Unit:mm
Tape Thickness
⑤Reel size
Chip Cavity
Insertion Pitch
Type
□MK042
A
B
F
K
T
t
0.23
0.43
1.0±0.02
0.5max.
0.25max.
E
C
◦Embossed tape(8mm wide)
A
㧗0.1/−0
B
D
R
W
Unit:mm
A
B
C
φ178±2.0
φ50min.
φ13.0±0.2
Unit:mm
Tape Thickness
D
E
R
Chip Cavity
Type
Insertion Pitch
F
φ21.0±0.8
2.0±0.5
1.0
A
B
K
T
□WK107
□MK212
□MK316
□MK325
1.0
1.65
2.0
2.8
1.8
2.4
3.6
3.6
1.3max
0.25±0.1
t
W
4.0±0.1
4mm wide tape
8mm wide tape
12mm wide tape
1.5max.
2.5max.
2.5max.
5±1.0
10±1.5
14±1.5
3.4max.
0.6max.
◦Embossed tape(12mm wide)
⑥Top Tape Strength
㧗0.1/−0
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow
as illustrated below.
2.0±0.1
F
⑦Bulk Cassette
The exchange of individual specification is necessary.
Please contact Taiyo Yuden sales channels.
Unit:mm
Tape Thickness
Chip Cavity
Type
Insertion Pitch
A
B
F
K
T
□MK432
3.7
4.9
8.0±0.1
4.0max.
0.6max.
12±0.1
36+0/-0.2
110±0.7
2.0+0/-0.1
1.5+0.1/-0
1.0+0/-0.1
Unit:mm
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_pack_e-01
mlcc_pack-P2
■ RELIABILITY DATA
Super Low Distortion Multilayer Ceramic Capacitors and Medium-High
Voltage Multilayer Ceramic Capacitors are noted separately.
Multilayer Ceramic Capacitors
1.Operating Temperature Range
Standard
Temperature Compensating
(Class 1)
-55 to +125℃
Specification
High Frequency Type
Temperature Range
B
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-25 to +85℃
-30 to +85℃
BJ
X5R
X7R
X6S
X7S
F
Specified
Value
B7
C6
C7
High Permittivity(Class 2)
F
Y5V
2. Storage Conditions
Standard
Temperature Compensating
(Class 1)
-55 to +125℃
Specification
High Frequency Type
Temperature Range
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-25 to +85℃
-30 to +85℃
B
BJ
X5R
X7R
X6S
X7S
F
Specified
Value
B7
C6
C7
High Permittivity(Class 2)
F
Y5V
3. Rated Voltage
Standard
50VDC, 25VDC, 16VDC
50VDC, 16VDC
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
High Permittivity(Class 2)
50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC
4. Withstanding Voltage(Between terminals)
Standard
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
No breakdown or damage
High Permittivit(y Class 2)
【Test Methods and Remarks】
Class 1
Class 2
Applied voltage
Duration
Rated voltage×3 Rated voltage×2.5
1 to 5 sec.
Charge/discharge current
50mA max.
5. Insulation Resistance
Standard
Temperature Compensating
(Class 1)
10000 MΩ min.
Specified
Value
High Frequency Type
C≦0.047μF : 10000 MΩ min.
C>0.047μF : 500MΩ・μF
High Permittivity(Class 2)Note 1
【Test Methods and Remarks】
Applied voltage: Rated voltage
Duration: 60±5 sec.
Charge/discharge current: 50mA max.
6. Capacitance(Tolerance)
0.5pF≦C≦5pF:±0.25pF
0.5pF<C≦10pF:±0.5pF
C>10pF:±5%
0.5pF≦C≦2pF:±0.1pF
C>2pF:±5%
RH
S△
T△
C△
U△
Standard
Temperature Compensating
(Class 1)
ꢁ
Specified
Value
0.5pF≦C≦2pF:±0.1pF
C>2pF:±5%
CH
RH
High Frequency Type
High Permittivity(Class 2)
BJ, B7, C6,C7:±10% or ±20%, F:-20%/+80%
【Test Methods and Remarks】
Class 1
Class 2
Standard
High Frequency Type
C≦10μF
C>10μF
Preconditioning
None
Thermal treatment(at 150℃ for 1hr)Note 2
Measuring frequency
Measuring voltage Note 1
Bias application
1MHz±10%
0.5 to 5Vrms
1kHz±10%
1±0.2Vrms
120±10Hz
0.5±0.1Vrms
None
7. Q or Dissipation Factor
Standard
C<30 pF:Q≧400+20C、C≧30 pF:Q≧1000ꢁ(C:Nominal capacitance)
Refer to detailed specification
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
High Permittivit(y Class 2)Note 1
BJ, B7, C6,C7:2.5% max.,ꢁF:7% max.
【Test Methods and Remarks】
Class 1
High Frequency Type
Class 2
Standard
C≦10μF
C>10μF
Preconditioning
None
Thermal treatment(at 150℃ for 1hr)Note 2
Measuring frequency
Measuring voltage Note 1
Bias application
1MHz±10%
1GHz
1kHz±10%
1±0.2Vrms
120±10Hz
0.5±0.1Vrms
High Frequency Type
Measuring equipment: HP4291A
Measuring jig: HP16192A
0.5 to 5Vrms
None
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
mlcc_reli-R1
■ RELIABILITY DATA
8. Temperature Characteristic(Without voltage application)
Temperature Characteristic[ppm/℃]
C□ :0 CH, CJ, CK
Tolerance
Standard
R□ :ー220 RH
H±60
J±120
K±250
Temperature Compensating
(Class 1)
S□ :ー330 SH, SJ, SK
T□ :ー470 TJ, TK
U□ :ー750 UJ, UK
SL :+350 to -1000
High Frequency Type
Specified
Value
Specification Capacitance change Reference temperature
Temperature Range
-25 to +85℃
-55 to +85℃
-55 to +125℃
-55 to +105℃
-55 to +125℃
-25 to +85℃
-30 to +85℃
B
±10%
±15%
20℃
25℃
25℃
25℃
25℃
20℃
25℃
BJ
X5R
X7R
X6S
X7S
F
B7
C6
C7
±15%
±22%
±22%
+30/ー80%
+22/ー82%
High Permittivity(Class 2)
F
Y5V
【Test Methods and Remarks】
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.
(C85-C20
)
6
× 10(ppm/℃)
C20×△Tꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁꢁ△T=65
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation.
(C-C2)
×100(%)
Step
B、F
Minimum operating temperature
20℃ 25℃
X5R、X7R、X6S、X7S、Y5V
C2
1
2
3
C
:Capacitance in Step 1 or Step 3
C2 :Capacitance in Step 2
Maximum operating temperature
9. Deflection
Appearance :
No abnormality
Standard
Capacitance change : Within ±5% or ±0.5 pF, whichever is larger.
Temperature Compensating
(Class 1)
Specified
Value
Appearance :
Capacitance change : Within±0.5 pF
Appearance : No abnormality
Capacitance change : Within ±12.5%(BJ, B7, C6, C7), Within ±30%(F)
No abnormality
High Frequency Type
High Permittivity(Class 2)
【Test Methods and Remarks】
Multilayer Ceramic Capacitors
Board
Thickness
0.8mm
Warp Duration
1mm 10 sec.
042、063 Type
The other types
Board
glass epoxy-resin substrate
Warp
1.6mm
Array Type
Board
Thickness
1.6mm
Warp Duration
1mm 10 sec.
Capacitance measurement shall
be conducted with the board bent
096、110、212 Type
glass epoxy-resin substrate
10. Body Strength
Standard
—
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
No mechanical damage.
High Permittivity(Class 2)
—
【Test Methods and Remarks】
High Frequency Type
Applied force: 5N
Duration: 10 sec.
A
A
A
11. Adhesive Strength of Terminal Electrodes
Standard
High Frequency Type
Temperature Compensating
(Class 1)
Specified
Value
No terminal separation or its indication.
High Permittivity(Class 2)
【Test Methods and Remarks】
Multilayer Ceramic Capacitors
Array Type
Applied force
Duration
Applied force
Duration
042、063 Type
105 Type or more
2N
5N
096 Type
2N
5N
30±5 sec.
30±5 sec.
110、212 Type
12. Solderability
Standard
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
At least 95% of terminal electrode is covered by new solder.
High Permittivity(Class 2)
【Test Methods and Remarks】
Solder type
H60A or H63A
Sn-3.0Ag-0.5Cu
Solder temperature
Duration
Eutectic solder
230±5℃
245±3℃
4±1 sec.
Lead-free solder
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
mlcc_reli-R2
■ RELIABILITY DATA
13. Resistance to Soldering
Appearance:
Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.
Q: Initial value
No abnormality
Standard
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
Temperature Compensating
(Class 1)
Appearance:
Capacitance change: Within ±2.5%
Q: Initial value
No abnormality
Specified
Value
High Frequency Type
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
Appearance:
No abnormality
Capacitance change: Within ±7.5%(BJ, B7, C6, C7)
Within ±20%(F)
Initial value
High Permittivity(Class 2)ꢁNote 1
Dissipation factor:
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
【Test Methods and Remarks】
Class 1
Class 2
105 Type
Arra(y 096, 110 Type)
None
105, 107, 212 Type
Arra(y 096, 110,212 Type)
Thermal treatment(at 150℃ for 1 hr)Note 2
042, 063 Type
042、063 Type
316, 325 Type
Preconditioning
Preheating
Preconditioning
Preheating
150℃, 1 to 2 min.
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
150℃, 1 to 2 min.
80 to 100℃, 2 to 5 min. 80 to 100℃, 5 to 10 min.
150 to 200℃, 2 to 5 min. 150 to 200℃, 5 to 10 min.
Solder temp.
Duration
270±5℃
3±0.5 sec.
6 to 24 hrs(Standard condition)Note 5
Solder temp.
Duration
270±5℃
3±0.5 sec.
24±2 hrs(Standard condition)Note 5
ꢁ
Recovery
Recovery
14. Temperature Cycle (Thermal Shock)
Appearance:
Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger.
Q: Initial value
No abnormality
Standard
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
Temperature Compensating
(Class 1)
Appearance:
Capacitance change: Within ±0.25pF
Q: Initial value
No abnormality
Specified
Value
High Frequency Type
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
Appearance:
No abnormality
Capacitance change: Within ±7.5%(BJ, B7, C6, C7)
Within ±20%(F)
Initial value
High Permittivity(Class 2)ꢁNote 1
Dissipation factor:
Insulation resistance: Initial value
Withstanding voltage(between terminals): No abnormality
【Test Methods and Remarks】
Class 1
None
Class 2
Preconditioning
1 cycle
Thermal treatment(at 150℃ for 1 hr)Note 2
Step
Temperature(℃)
Lowest operating temperature +0/-3
Normal temperature
Time(min.)
30±3
2 to 3
1
2
3
4
Highest operating temperature +0/-3
Normal temperature
30±3
2 to 3
Number of cycles
Recovery
5 times
6 to 24 hrs(Standard condition)Note 5
24±2 hrs(Standard condition)Note 5
15. Humidity(Steady State)
Appearance:
No abnormality
Capacitance change: Within ±5% or ±0.5pF, whichever is larger.
Q: C<10pF: Q≧200+10Cꢁ
10≦C<30pF: Q≧275+2.5C
C≧30pF: Q≧350 (C:Nominal capacitance)
Insulation resistance: 1000 MΩ min.
Appearance: No abnormality
Standard
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type
Capacitance change: Within ±0.5pF,
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%(BJ, B7, C6, C7)
Within ±30%(F)
High Permittivity(Class 2)ꢁNote 1
Dissipation factor:
5.0% max.(BJ, B7, C6, C7)
11.0% max(. F)
Insulation resistance: 50 MΩμF or 1000 MΩ whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
40±2℃
High Frequency Type
All items
Thermal treatment(at 150℃ for 1 hr)ꢁNote 2
40±2℃
Preconditioning
Temperature
Humidity
None
Preconditioning
Temperature
Humidity
60±2℃
90 to 95%RH
90 to 95%RH
Duration
500+24/ー0 hrs
Duration
500+24/ー0 hrs
Recovery
6 to 24 hrs(Standard condition)Note 5
Recovery
24±2 hrs(Standard condition)Note 5
ꢁ
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
mlcc_reli-R3
■ RELIABILITY DATA
16. Humidity Loading
Appearance:
No abnormality
Capacitance change: Within ±7.5% or ±0.75pF, whichever is larger.
Standard
Q:
C<30pF:Q≧100+10C/3
C≧30pF:Q≧200
(C:Nominal capacitance)
Temperature Compensating
(Class 1)
Insulation resistance: 500 MΩ min.
Appearance: No abnormality
Capacitance change: C≦2pF:Within ±0.4 pF
Specified
Value
High Frequency Type
C>2pF:Within ±0.75 pF
(C:Nominal capacitance)
Insulation resistance: 500 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%(BJ, B7, C6, C7)
Within ±30%(F)
High Permittivity(Class 2)ꢁNote 1
Dissipation factor:
5.0% max.(BJ, B7, C6, C7)
11.0% max(. F)
Insulation resistance: 25 MΩμF or 500 MΩ, whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
High Frequency Type
All items
Preconditioning
Temperature
Humidity
None
Preconditioning
Voltage treatment
(Rated voltage are applied for 1 hour at 40℃)Note 3
40±2℃
60±2℃
Temperature
Humidity
40±2℃
90 to 95%RH
500+24/ー0 hrs
90 to 95%RH
Duration
500+24/ー0 hrs
Rated voltage
50mA max.
Duration
Applied voltage
Charge/discharge current
Recovery
Applied voltage
Charge/discharge current
Recovery
Rated voltage
50mA max.
6 to 24 hrs(Standard condition)Note 5
ꢁ
24±2 hrs(Standard condition)Note 5
17. High Temperature Loading
Appearance:
No abnormality
Capacitance change: Within ±3% or ±0.3pF, whichever is larger.
Q: C<10pF: Q≧200+10C
10≦C<30pF:Q≧275+2.5C
C≧30pF: Q≧350(C:Nominal capacitance)
Insulation resistance: 1000 MΩ min.
Appearance: No abnormality
Standard
Temperature Compensating
(Class 1)
Specified
Value
High Frequency Type Capacitance change: Within ±3% or ±0.3pF, whichever is larger.
Insulation resistance: 1000 MΩ min.
Appearance:
No abnormality
Capacitance change: Within ±12.5%(BJ, B7, C6, C7)
Within ±30%(F)
High Permittivity(Class 2)ꢁNote 1
Dissipation factor:
5.0% max(. BJ, B7, C6, C7)
11.0% max(. F)
Insulation resistance: 50 MΩμF or 1000 MΩ, whichever is smaller.
【Test Methods and Remarks】
Class 1
Class 2
Standard
High Frequency Type
BJ, F
C6
B7, C7
Preconditioning
Temperature
None
Preconditioning
Voltage treatment(Twice the rated voltage shall be
applied for 1 hour at 85℃, 105℃ or 125℃)Note 3, 4
125±3℃
Temperature
Duration
85±2℃
105±3℃
1000+48/ー0 hrs
Rated voltage×2ꢁNote 4
50mA max.
125±3℃
Duration
1000+48/ー0 hrs
Rated voltage×2
50mA max.
Applied voltage
Charge/discharge current
Recovery
Applied voltage
Charge/discharge current
Recovery
6 to 24hr(Standard condition)Note 5
ꢁ
24±2 hrs(Standard condition)Note 5
Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail.
Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150+0/-10℃ for an hour and kept at room temperature for 24±2hours.
Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and
kept at room temperature for 24±2hours.
Note 4 150% of rated voltage is applicable to some items. Please refer to their specifications for further information.
Note 5 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condi-
tion.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
mlcc_reli-R4
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
1. Circuit Design
◆Verification of operating environment, electrical rating and performance
1.A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from them used in general pur-
pose applications.
◆Operating Voltage(Verification of Rated voltage)
1.The operating voltage for capacitors must always be their rated voltage or less.
Precautions
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2.Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC voltage or a pulse voltage
having rapid rise time is used in a circuit.
2. PCB Design
◆Pattern configurations(Design of Land-patterns)
1. When capacitors are mounted on PCBs, the amount of solder used(size of fillet)can directly affect the capacitor performance. Therefore, the following items must
be carefully considered in the design of land patterns:
(1)Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider appropriate land-patterns for proper
amount of solder.
Precautions
(2)When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by solder-resist.
◆Pattern configuration(s Capacitor layout on PCBs)
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes(PCB cutting, board inspection,
mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.). For this reason, land pattern configurations and positions of capacitors
shall be carefully considered to minimize stresses.
◆Pattern configurations(Design of Land-patterns)
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
(1)Recommended land dimensions for typical chip capacitors
●Multilayer Ceramic Capacitors : Recommended land dimensions(unit: mm)
ꢁWave-soldering
Land patterns for PCBs
Chip capacitor
Land
Type 107
212
2.0
316
3.2
1.6
325
3.2
2.5
L
1.6
0.8
Solder-resist
Size
W
51.25
A
0.8 to 1.0 1.0 to 1.4 1.8 to 2.5 1.8 to 2.5
0.5 to 0.8 0.8 to 1.5 0.8 to 1.7 0.8 to 1.7
0.6 to 0.8 0.9 to 1.2 1.2 to 1.6 1.8 to 2.5
C
B
C
B
B
A
Reflow-soldering
Type 042
063
0.6
0.3
105
1.0
0.5
107
1.6
0.8
212
2.0
316
3.2
1.6
325
3.2
2.5
432
4.5
3.2
Chip capacitor
L
0.4
0.2
Size
W
51.25
W
A
0.15 to 0.25 0.20 to 0.30 0.45 to 0.55 0.8 to 1.0 0.8 to 1.2 1.8 to 2.5 1.8 to 2.5 2.5 to 3.5
0.15 to 0.20 0.20 to 0.30 0.40 to 0.50 0.6 to 0.8 0.8 to 1.2 1.0 to 1.5 1.0 to 1.5 1.5 to 1.8
0.15 to 0.30 0.25 to 0.40 0.45 to 0.55 0.6 to 0.8 0.9 to 1.6 1.2 to 2.0 1.8 to 3.2 2.3 to 3.5
B
C
L
Note:Recommended land size might be different according to the allowance of the size of the product.
LWDC
●LWDC: Recommended land dimensions for reflow-soldering(unit: mm)
Type
105
0.52
107
50.8
212
1.25
L
W
Size
W
1.0
1.6
2.0
A
0.18 to 0.22
0.2 to 0.25
0.9 to 1.1
0.25 to 0.3
0.3 to 0.4
1.5 to 1.7
0.5 to 0.7
0.4 to 0.5
1.9 to 2.1
B
C
L
Technical
consider-
ations
●Array type: Recommended land dimensions for reflow-soldering(unit: mm)
Type 096(2 circuits)110(2 circuits)212(2 circuits) 212(4 circuits)
2 circuits
4 circuits
Chip capacitor
L
0.9
1.37
2.0
2.0
c
c
Size
W
0.6
1.0
1.25
1.25
a
b
a
a
b
a
a
0.25 to 0.35
0.15 to 0.25
0.15 to 0.25
0.45
0.35 to 0.45
0.55 to 0.65
0.3 to 0.4
0.64
0.5 to 0.6
0.5 to 0.6
0.5 to 0.6
1.0
0.5 to 0.6
0.5 to 0.6
0.2 to 0.3
0.5
b
c
d
d
d
Land
(2)Examples of good and bad solder application
Items
Not recommended
Recommended
Mixed mounting of
SMD and leaded
components
Component
placement close to
the chassis
Hand-soldering
of leaded
components
near mounted
components
Horizontal
component
placement
To next page
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
mlcc_prec-P1
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
2. PCB Design
◆Pattern configuration(s Capacitor layout on PCBs)
1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any possible mechanical stresses from board warp or de-
flection.
Items
Not recommended
Recommended
Deflection of board
Technical
consider-
ations
1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.
1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods are listed in order from
least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB, split methods as well as chip location.
3. Mounting
◆Adjustment of mounting machine
1.When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.
2.Maintenance and inspection of mounting machines shall be conducted periodically.
Precautions ◆Selection of Adhesives
1.When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the following factors are appro-
priately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and hardening period. Therefore, please contact us for further
information.
◆Adjustment of mounting machine
1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid this, the following points
shall be considerable.
(1)The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection.
(2)The pressure of nozzle shall be adjusted between 1 and 3 N static loads.
(3)To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be used on the other side of the
PCB. The following diagrams show some typical examples of good and bad pick-up nozzle placement:
Items
Not recommended
Recommended
Single-sided
mounting
Double-sided
mounting
2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical impact on the capacitors.
To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of the pin shall be conducted
periodically.
Technical
consider-
ations
◆Selection of Adhesives
Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in stresses on the capaci-
tors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect components. Therefore, the following precautions
shall be noted in the application of adhesives.
(1)Required adhesive characteristics
a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive shall have sufficient strength at high temperatures.
c. The adhesive shall have good coating and thickness consistency.
d. The adhesive shall be used during its prescribed shelf life.
e. The adhesive shall harden rapidly.
f . The adhesive shall have corrosion resistance.
g. The adhesive shall have excellent insulation characteristics.
h. The adhesive shall have no emission of toxic gasses and no effect on the human body.
(2)The recommended amount of adhesives is as follows;
[Recommended condition]
Figure
212/316 case sizes as examples
a
b
c
0.3mm min
100 to 120μm
Adhesives shall not contact land
ꢁꢁ
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
mlcc_prec-P2
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
4. Soldering
◆Selection of Flux
Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
(1)Flux used shall be less than or equal to 0.1 wt%(in CI equivalent)of halogenated content. Flux having a strong acidity content shall not be applied.
(2)When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level.
(3)When water-soluble flux is used, special care shall be taken to properly clean the boards.
Precautions
◆Soldering
Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions.
Sn-Zn solder paste can adversely affect MLCC reliability.
Please contact us prior to usage of Sn-Zn solder.
◆Selection of Flux
1-1. When too much halogenated substance(Chlorine, etc.)content is used to activate flux, or highly acidic flux is used, it may lead to corrosion of terminal elec-
trodes or degradation of insulation resistance on the surfaces of the capacitors.
1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted and may adversely affect
the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high humidity conditions may cause
a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning methods and the capability of the machines used shall also be
considered carefully when water-soluble flux is used.
◆Soldering
• Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling.
• Therefore, the soldering must be conducted with great care so as to prevent malfunction of the components due to excessive thermal shock.
• Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between the capacitors and solder shall be within 100 to 130℃.
• Cooling : The temperature difference between the capacitors and cleaning process shall not be greater than 100℃.
[Reflow soldering]
【Recommended conditions for eutectic soldering】
【Recommended condition for Pb-free soldering】
300
300
Peak 260℃ Max.
Within 10sec.
Preheating
230℃
Within 10 sec.
60sec. 60sec.
200
200
100
0
Slow
cooling
Min.
Min.
Slow cooling
100
Heating above
Preheating 150℃
230℃
Capacitor
PC board
60sec. Min.
40sec. Max.
0
Solder
T
Caution
①The ideal condition is to have solder mass(fillet)controlled to 1/2 to 1/3 of the thickness of a capacitor.
②Because excessive dwell times can adversely affect solderability, soldering duration shall be kept as
close to recommended times as possible.
Technical
consider-
ations
[Wave soldering]
【Recommended conditions for eutectic soldering】
【Recommended condition for Pb-free soldering】
300
300
Peak 260℃ Max.
230~250℃
Within 10sec.
Within 3sec.
Preheating
120sec. Min.
200
120sec. Min.
200
Slow
cooling
Slow cooling
Preheating
150℃
100
100
0
0
Caution
①Wave soldering must not be applied to capacitors designated as for reflow soldering only.
[Hand soldering]
【Recommended conditions for eutectic soldering】
【Recommended condition for Pb-free soldering】
400
400
300
200
100
0
400
300
200
100
0
Peak 350℃ Max.
Peak 280℃ Max.
230~280℃
Within 3 sec.
300
Within 3sec.
Within 3sec.
⊿T
Slow cooling
Slow cooling
⊿T
200
Slow cooling
Preheating
150℃ Min.
Preheating
150℃ Min.
100
Preheating
60sec. Min.
60sec. Min.
60sec. Min.
0
⊿T
⊿T≦150℃
⊿T
⊿T≦130℃
316type or less
325type or more
Caution
①Use a 50W soldering iron with a maximum tip diameter of 1.0 mm.
②The soldering iron shall not directly touch capacitors.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
mlcc_prec-P3
■ PRECAUTIONS
Precautions on the use of Multilayer Ceramic Capacitors
5. Cleaning
◆Cleaning conditions
1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use of the cleaning(. e.g. to
Precautions
remove soldering flux or other materials from the production process.)
2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect capacitor's characteristics.
1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate their outer coating, resulting in
a degradation of the capacitor's electrical properties(especially insulation resistance).
2. Inappropriate cleaning conditions(insufficient or excessive cleaning)may adversely affect the performance of the capacitors.
Technical
consider-
ations
In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead to the cracking of capacitors or the soldered
portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall be carefully checked;
Ultrasonic output : 20 W/ℓor less
Ultrasonic frequency : 40 kHz or less
Ultrasonic washing period : 5 min. or less
6. Resin coating and mold
1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while left under normal stor-
age conditions resulting in the deterioration of the capacitor's performance.
Precautions
7. Handling
2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat may lead to damage or
destruction of capacitors.
The use of such resins, molding materials etc. is not recommended.
◆Splitting of PCB
1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board.
2. Board separation shall not be done manually, but by using the appropriate devices.
Precautions
◆Mechanical considerations
Be careful not to subject capacitors to excessive mechanical shocks.
(1)If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used.
(2)Please be careful that the mounted components do not come in contact with or bump against other boards or components.
8. Storage conditions
◆Storage
1.To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control temperature and humidity in
the storage area. Humidity should especially be kept as low as possible.
・Recommended conditions
Ambient temperature
Humidity
: Below 30℃
: Below 70% RH
Precautions
The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as time passes, so capaci-
tors shall be used within 6 months from the time of delivery.
・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air.
2.The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time,so care shall be taken to design circuits . Even if
capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at 150℃ for 1hour.
Technical If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and quality loss of taping/
consider- packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the above period, please check solderability be-
ations
fore using the capacitors.
※RCR-2335B(Safety Application Guide for fixed ceramic capacitors for use in electronic equipment)is published by JEITA.
ꢁPlease check the guide regarding precautions for deflection test, soldering by spot heat, and so on.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_prec_e-01
mlcc_prec-P4
Notice for TAIYO YUDEN products
(
High Reliability Application Multilayer Ceramic Capacitors
)
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ High Reliability Application Multilayer Ceramic Capacitors are developed, designed and intended for use in high
riliability electronic appliances and electronic communication equipment or industrial equipment. However before
incorporating the components or devices into any equipment in the field such as transportation (train control, ship
control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base
station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd.
for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
notice09_e-01
41
HIGH RELIABILITY APPLICATION MULTILAYER CERAMIC CAPACITORS
REFLOW
■ FEATURES
■ APPLICATIONS
◦Aꢀ utomotive application.
◦ꢀAs the termination of the component external electrode has the plating
◦Iꢀndustrial use like DC/DC converter, measuring equipment, and so on.
structure, it's sutable for the soldering heat resistanse.
◦Cꢀ ommunication use like high reliability server, and so on.
◦ꢀThese products apply RoHS compliance.
◦A High reliability application part.
■ OPERATING TEMP.
code
B7
Temp.characteristics
X7R
operating Temp. range
-55~+125℃
■ ORDERING CODE
L M R 1 0 7 △ B 7 1 0 5 K A - T
❶
❷
❸
❹
❺
❻
❼
❽
❾
❿
❶
Rated
voltage
❷Series name
Multilayer ceramic
capacitor
❹Dimension
❺Temperature characteristics〔%〕
❻
Nominal
❼Capacitance ❽Thickness ❾Special code
Capacitanc
〔e
pF〕
Tolerances
〔mm〕
Type (inch) L×W〔mm〕
107 (0603) 1.6×0.8
212 (0805) 2.0×1.25
△B7
±15(X7R)
△=Blank space
-
Standard
M
〔WV〕
J
Effective
figures
K
±10%
±20%
A
0.8
1.25
1.6
6.3
10
16
25
50
M
G
L
L
E
T
105 1,000,000
❿Packaging
❸End termination
R
316 (1206)
325 (1210)
3.2×1.6
3.2×2.5
472
4,700
T
Tape&Reel
N
M
1.9
2.5
U
■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
Standard quantity [pcs]
Type(EIA)
L
W
T
e
Paper tape
4000
Embossed tape
107
212
316
1.6±0.1
2.0±0.1
3.2±0.15
0.8±0.1
1.25±0.1
1.6±0.15
0.8±0.1
A
0.1 - 0.6
0.25 - 0.75
0.25 - 0.85
0.3 - 0.9
-
1.25±0.1
1.6±0.2
1.9±0.2
2.5±0.2
G
L
-
3000
-
-
2000
N
M
325
3.2±0.3
2.5±0.2
0.3 - 0.9
500(T), 1000(P)
Unit:mm
■ AVAILABLE CAPACITANCE RANGE
Type
Temp.Char
VDC
107
212
316
X7R
16V
325
X7R
X7R
25V
X7R
Cap
[μF]
50V
25V
16V
10V
50V
10V
50V
25V
10V
6.3V
50V
25V
[pF:3digits]
103
0.01
0.022
0.047
0.1
223
473
G
G
G
104
A
0.22
0.47
1.0
224
A
L
474
A
G
G
L
L
N
N
105
A
2.2
225
G
L
N
N
4.7
475
L
10
106
L
M
Letters inside the shaded boxes indicate thickness.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc09_e-01
42
■ PART NUMBERS
●B(7 X7R)Series
【Class II : 107 TYPE / 0603】
Noninal
Capacitance
〔μF〕
Operating
temperature R:REFLOW
(℃)
Soldering
Measuring
frequency and
voltage
Thickness
〔mm〕
Temperature Rated voltage
Capacitance
tolerance
tanδ
〔%〕Max.
Ordering code
characteristics
[VDC]
W:WAVE
LMR107 B7 105□A
EMR107 B7 474□A
TMR107 B7 224□A
UMR107 B7 104□A
10
16
25
50
1
5
0.47
0.22
0.1
K(±10%)or
M(±20%)
X7R
0.8±0.1
-55~+125
R
1kHz-1.0Vrms
3.5
【Class II : 212 TYPE / 0805】
Noninal
Capacitance
〔μF〕
Operating
temperature R:REFLOW
(℃)
Soldering
Measuring
frequency and
voltage
Thickness
〔mm〕
Temperature Rated voltage
Capacitance
tolerance
tanδ
〔%〕Max.
Ordering code
characteristics
[VDC]
W:WAVE
LMR212 B7 225□G
TMR212 B7 105□G
TMR212 B7 474□G
UMR212 B7 224□G
UMR212 B7 104□G
UMR212 B7 473□G
10
25
25
50
50
50
2.2
5
1
0.47
0.22
0.1
K(±10%)or
M(±20%)
X7R
1.25±0.1
-55~+125
R
1kHz-1.0Vrms
3.5
0.047
【Class II : 316 TYPE / 1206】
Noninal
Capacitance
〔μF〕
Operating
temperature R:REFLOW
(℃)
Soldering
Measuring
frequency and
voltage
Thickness
〔mm〕
Temperature Rated voltage
Capacitance
tolerance
tanδ
〔%〕Max.
Ordering code
characteristics
[VDC]
W:WAVE
JMR316 B7 106□L
LMR316 B7 475□L
EMR316 B7 225□L
TMR316 B7 105□L
TMR316 B7 474□L
UMR316 B7 224□L
6.3
10
16
25
25
50
10
4.7
2.2
1
1kHz-0.5Vrms
5
K(±10%)or
M(±20%)
X7R
1.6±0.2
-55~+125
R
1kHz-1.0Vrms
3.5
0.47
0.22
【Class II : 325 TYPE / 1210】
Noninal
Capacitance
〔μF〕
Operating
temperature R:REFLOW
(℃)
Soldering
Measuring
frequency and
voltage
Thickness
〔mm〕
Temperature Rated voltage
Capacitance
tolerance
tanδ
〔%〕Max.
Ordering code
characteristics
[VDC]
W:WAVE
TMR325 B7 106□M
TMR325 B7 475□N
TMR325 B7 225□N
UMR325 B7 105□N
UMR325 B7 474□N
25
25
25
50
50
10
4.7
2.2
1
2.5±0.2
1.9±0.2
5
K(±10%)or
M(±20%)
X7R
-55~+125
R
1kHz-1.0Vrms
3.5
0.47
■ ELECTRICAL CHARACTERISTICS
●Example of Impedance ESR vs. Frequency characteristics
Taiyo Yuden multilayer ceramic capacitor
■
EMR107 B7 474KA
LMR107 B7 105KA
TMR212 B7105KG
LMR212 B7 225KG
100000
10000
10000
1000
100
1000000
10000
ESR
ESR
100000
10000
1000
100
1000
Impedance
Impedance
1000
100
10
100
10
1
10
1
10
1
0.1
0.1
0.01
0.1
0.01
1
0.1
0.01
0.001
0.001
0.1
0.01
0.1
0.001
0.1
0.1
1
10
100 1000 10000100000
1
10
100 1000 10000100000
1
10
100 1000 10000 100000
1
10
100 1000 10000100000
〔MHz〕
〔MHz〕
LMR316 B7 475KL
JMR316 B7 106KL
TMR325 B7 106KM
10000
1000
10000
1000
10000
1000
ESR
ESR
ESR
Impedance
Impedance
Impedance
100
10
100
10
100
10
1
0.1
1
0.1
1
0.1
0.01
0.001
0.01
0.001
0.01
0.001
0.1
1
10 100 1000 100001000001000000
0.1
1
10 100 1000 100001000001000000
0.1
1
10 100 1000 100001000001000000
〔MHz〕
〔MHz〕
〔MHz〕
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc09_e-01
43
■ PACKAGING
①Minimum Quantity
◦Taped package
③Taping dimensions
ꢀ◦Paper Tape(0.315 inches wide)
Thickness
mm(inch)
Standard quantity [pcs]
Typ(e EIA)
code
A
Paper tape Embossed tape
□MR107(0603)
□MR212(0805)
□MR316(1206)
0.8(0.031)
1.25(0.049)
1.6(0.063)
1.9(0.075)
2.5(0.098)
4000
—
3000
G
—
L
—
2000
N
—
2000
□MR325(1210)
M
—
50(0 T), 100(0 P)
②Taping material
※No bottom tape for pressed carrier tape
◦Card board carriea tape
Chip Cavity
Insertion Pitch
F
Tape Thickness
T
Type
(EIA)
A
B
1.0
1.8
4.0±0.1
(0.157±0.004)
1.1max.
(0.043max.)
□MR107(0603)
(0.039) (0.071)
Unit:mm(inch)
◦Embossed tape(0.315 inches wide)
◦Embossed tape
Chip Cavity
Insertion Pitch
Tape Thickness
Type
(EIA)
A
B
F
K
T
1.65
2.4
□MR212(0805)
□MR316(1206)
□MR325(1210)
(0.065) (0.094)
2.0
3.6
4.0±0.1
3.4max.
0.6max.
(0.079) (0.142) (0.157±0.004)(0.134max.)(0.024max.)
2.8
3.6
(0.110) (0.142)
Unit:mm(inch)
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc09_pack_e-01
mlcc09_pack-P1
■ RELIABILITY DATA
1. Operating Temperature Range
Specified Value
X7R(-55℃~+125℃)
【Test Methods and Remarks】
Continuous use is available in this range.(reference temperature : 25℃)
2.Highest Operating temperature Range
Specified Value
X7R(-55℃~+125℃)
【Test Methods and Remarks】
Maximum ambient temperature at which capacitors can be continuously used with rated voltage applied.
3. Rated Voltage
Specified Value
Please refer to the page of the "PART NUMBERS".
【Test Methods and Remarks】
Continuous maximum applied voltage. If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages should be lower than the rated voltage of the capacitor.
4. Shape and Dimensions
Specified Value
Please refer to the page of the "EXTERNAL DIMENSIONS".
5. Heat Treatmen(t ClassⅡ)
【Test Methods and Remarks】
Initial value shall be measured after test sample is heat-treated at 150+0/-10℃ for an hour and kept at room temperature for 24 ±2 hours.
6. Voltage Treatmen(t ClassⅡ)
【Test Methods and Remarks】
Initial value shall be measured after test sample is voltage-treated for an hour at temperature and voltage which are specified as test conditions, and kept at room temperature
for 24 ±2 hours.
7. Dielectric Withstanding Voltage(between terminals)
Specified Value
No abnormality.
【Test Methods and Remarks】
Applied voltage : Rated voltage × 2.5
Duration : 1 to 5 seconds.
Charging and discharging current shall be 50mA max.
8. Insulation Resistance
Specified Value
Larger than whichever smaller of 500 MΩ・µF or 104 MΩ
【Test Methods and Remarks】
Applied voltage : Rated voltage
Duration : 60±5 seconds.
Charging and discharging current shall be 50mA max.
9. Capacitance and Tolerance
Specified Value
Please refer to the page of the "PART NUMBERS".
【Test Methods and Remarks】
Measurement frequency :1KHz±10%(C≦10μF)
Measurement voltage:1±0.2Vrm(s C≦10μF)
0.5±0.1V(6.3V rated voltage)
Heat treatment specified in No.5 of the specification shall be conducted prior to measurement.
10. Q or Dissipation facto(r tanδ)
Specified Value
Please refer to the page of the "PART NUMBERS".
【Test Methods and Remarks】
Measurement frequency :1KHz±10%(C≦10μF)
Measurement voltage:1±0.2Vrm(s C≦10μF)
0.5±0.1V(6.3V rated voltage)
Heat treatment specified in No.5 of the specification shall be conducted prior to measurement. NO DC bias is applied.
11. Temperature Characteristic(without DC bias)
Specified Value
X7R(-55℃~+125℃):±15%
【Test Methods and Remarks】
Confirming to EIA RS-198-D(1991).
Heat treatment specified in No.5 of the specification shall be conducted prior to measurement.
Change of the muximum capacitance deviation in step 1 to 5. Temperature at step 1:+25℃
Temperature at step 2:minimum operating temperature
Temperature at step 3:+25℃
Temperature at step 4:maximum operating temperature Temperature at step 5:+25℃
12. Adhesive Force of Terminal Electrodes
Specified Value
Appearance:Terminal electrodes shall be no exfoliation or a sign of exfoliation.
【Test Methods and Remarks】
Solderlands refer to fig.1.
c
Note: Applying force : 10N for larger than 2125 size, 5N for 0603 size.
Case size
Duration : 30±5 seconds.
Dimension
1608
1.0
2125
3216
2.2
3225
2.2
a
b
c
1.2
4.0
b
3.0
5.0
5.0
a
1.2
1.65
2.0
2.9
fig.1
13. Vibration
Appearance:Initial performance shall be satisfied.
Capacitance Change:≤±7.5%
Q or Dissipation Factor:[Dissipation Factor]Initial value shall be satisfied.
Insulation Resistance;Initial value shall be satisfied.
Specified Value
【Test Methods and Remarks】
Heat treatment specified in No.5 of the specification shall be conducted prior to test. Measurement shall be conducted after test sample is heat treated as specified in No.5.
Solderlands refer to figure 1.
Direction of the vibration test: X, Y, Z each of 3 orientations for 2 hours respectyively(total 6 hours)ꢀ
Vibration frequency:10 ~55~10Hz(1 minutes each)
Total amplitude: 1.5 mm
Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc09_reli_e-01
mlcc09_reli-P1
■ RELIABILITY DATA
14. Resistance to Soldering Heat
Appearance:No abnormality
Capacitance Change:≤±7.5%
Specified Value
Q or Dissipation Factor:[Dissipation Factor]Initial value shall be satisfied.
Insulation Resistance:Initial value shall be satisfied.
Dielectric Withstanding Voltage(between terminals):No abnormality
【Test Methods and Remarks】
Heat treatment specified in No.5 of the specification shall be conducted prior to test.
Immerse test sample in an solder solution(Sn/3.0Ag/0.5Cu).
Soldering temperature : 270℃±5℃
Duration: 3±0.5 seconds
Soaking position : test sample is soaked until the terminal electrode is covered in solder solution.Preheating condition:3216 size or smaller size:120~150℃ for 1 minute,
3225 size:100~120℃ for 1 minute, 170~200℃ for 1 minute. Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
15. Solderability
Specified Value
More than 95% of terminal electrode shall be covered with fresh solder.
【Test Methods and Remarks】
Heat treatment specified in No.5 of the specification shall be conducted prior to test.
Immerse test sample in an solder solution(Sn/3.0Ag/0.5Cu). Soldering temperature : 245℃±5℃
Duration: 4±1 seconds
Dipping position : test sample is immersed until the terminal electrode is covered in solder solution.
16. Thermal shock
Appearance:No abnormality
Capacitance Change:≤ ±7.5%
Specified Value
Q or Dissipation Factor:Dissipation Factor]Initial value shall be satisfied.
Insulation Resistance:Initial value shall be satisfied.
Dielectric Withstanding Voltage(between terminals):No abnormality
【Test Methods and Remarks】
Heat treatment specified in No.5 of the specification shall be conducted prior to test.
Measurement shall be conducted after test sample is heat treated as specified in No.5.
condition of the one cycle(Air-Air)/
stage 1 temperature:minimum usage temperature(-3℃/+0)for 15±1 min. transfer time within 20 seconds
stage 2 temperature:maximum usage temperature(-0℃/+3℃)for 15±1 min. transfer time within 20 seconds test cycles:100 times.
Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
c
Case size
Dimension
1608
0.6
2125
0.8
3216
2.0
3225
2.0
a
b
c
b
2.2
3.0
4.4
4.4
a
0.9
1.3
1.7
2.6
Fig.2
17. Humidity Loading
Specified Value
Appearance:No abnormality
Capacitance Change:≤ ±12.5%
Q or Dissipation Factor:5.0max.
Insulation Resistance:Larger than Whichever smaller of 25MΩ・µF or 500MΩ
【Test Methods and Remarks】
Test condition: 85℃/85%RH.
Duration : 1000 +48/-0 hours.
DC Bias : Applied Rated Voltage.
Voltage treatment specified in No.6 of the specification shall be conducted prior to test. Measurement after the test shall be made after test sample is kept at room tempera-
ture for 24 ±2 hours.
18. High Temperature Loading
Appearance:No abnormality
Capacitance Change:≤ ±12.5%
Specified Value
Q or Dissipation Factor:5.0max.
Insulation Resistance:Larger than Whichever smaller of 25MΩ・µF or 500MΩ
【Test Methods and Remarks】
Voltage treatment specified in No.6 of the specification shall be conducted prior to test. Test sample shall be put in thermostatic oven with maximum temperature.
Applied voltage : Rated voltage x 2
Duration : 1000 +48/-0 hours.
Charging and discharging current shall be 50mA or less. Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
19. Resistance to Flexure of substrate
Appearance:No abnormality
Capacitance Change:≤ ±12.5%
Specified Value
Q or Dissipation Factor:[Dissipation Factor]Initial value shall be satisfied.
Insulation Resistance:Initial value shall be satisfied.
【Test Methods and Remarks】
Warp : 1 mm Testing board: grass epoxy- resin substrate thickness :
1.6 mmTest board and solderlands refer to fig. 3 Measurement shall be made with board in the bent position(. fig.4)
Case size
R5
Dimension
1608
0.6
2125
0.8
3216
2.0
3225
2.0
Board
Warp
a
b
c
2.2
3.0
4.4
4.4
45±2 45±2
0.9
1.3
1.7
2.6
Fig.3
20. High Temperature Exposure
ꢀFig.4
Appearance:No abnormality
Capacitance Change:≤ ±10.0%
Q or Dissipation factor : 5.0max.
Specified Value
Insulation Resistance:Larger than whichever smaller of 500MΩ・µF or 10000MΩ
【Test Methods and Remarks】
Heat treatment specified in No.5 of the specification shall be conducted prior to test. Test sample shall be put in thermostatic oven with maximum temperature.
Duration : 1000 +48/-0 hours.
Initial value shall be measured after test sample is heat-treated specified No.5.
Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc09_reli_e-01
mlcc09_reli-P2
■ RELIABILITY DATA
21. Temperature Cycling
Appearance:No abnormality
Capacitance Change:≤ ±7.5%
Q or Dissipation Factor:Dissipation Factor]Initial value shall be satisfied.
Insulation Resistance:Larger than whichever smaller of 500MΩ・µF or 10000MΩ
Specified Value
【Test Methods and Remarks】
Heat treatment specified in No.5 of the specification shall be conducted prior to test. Measurement shall be conducted after test sample is heat treated as specified in No.5.
condition of the one cycle/
stage 1 temperature:minimum usage temperature(-3℃/+0)for 30±3 min.
stage 2 temperature:+25℃ for 2 ~3 min.
stage 3 temperature:maximum usage temperature(-0℃/+3℃)for 30±3min.
stage 4 temperature:+25℃ for 2 ~3 min.
test cycles:100 times
Solderlands refer to fig.2
Measurement after the test shall be made after test sample is kept at room temperature for 24 ±2 hours.
22. Body strength
Specified Value
No mecanical damage
R=0.5
【Test Methods and Remarks】
applying force : 10N, applying time : 10 seconds
Pressing Jig
Chip
Pressurization
W
L
L ≧
W
0.6L
L
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc09_reli_e-01
mlcc09_reli-P3
■ PRECAUTIONS
1.Circuit Design
◆Verification of operating environment, electrical rating and performance
1.A malfunction in medical equipment, spacecraft, nuclear reactors, etc. may cause serious harm to human life or have severe social ramifications.
As such, any capacitors to be used in such equipment may require higher safety and/or reliability considerations and should be clearly differentiated from
components used in general purpose applications.
◆Operating Voltage(Verification of Rated voltage)
1.The operating voltage for capacitors must always be lower than their rated values.
Precautions
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages should be lower than the rated value of the capacitor chosen. For a circuit
where both an AC and a pulse voltage may be present, the sum of their peak voltages should also be lower than the capacitor's rated voltage.
2.Even if the applied voltage is lower than the rated value, the reliability of capacitors might be reduced if either a high frequency AC voltage or a pulse
voltage having rapid rise time is present in the circuit.
2. PCB Design
Precautions
◆Pattern configurations(Design of Land-patterns)
1.When capacitors are mounted on a PCB, the amount of solder used(size of fillet)can directly affect capacitor performance. Therefore, the following
items must be carefully considered in the design of solder land patterns:
(1)The amount of solder applied can affect the ability of chips to withstand mechanical stresses which may lead to breaking or cracking. Therefore, when
designing land-patterns it is necessary to consider the appropriate size and configuration of the solder pads which in turn determines the amount of
solder necessary to form the fillets.
(2)When more than one part is jointly soldered onto the same land or pad, the pad must be designed so that each component's soldering point is separated by solder-resist.
◆Pattern configuration(s Capacitor layout on panelized [breakaway] PC boards)
1.After capacitors have been mounted on the boards, chips can be subjected to mechanical stresses in subsequent manufacturing processes(PCB cutting,
board inspection, mounting of additional parts, assembly into the chassis, wave soldering the reflow soldered boards etc.) For this reason, planning
pattern configurations and the position of SMD capacitors should be carefully performed to minimize stress.
◆Pattern configurations(Design of Land-patterns)
1.The following diagrams and tables show some examples of recommended patterns to prevent excessive solder amourts(. larger fillets which extend above
the component end terminations)Examples of improper pattern designs are also shown.
(1)Recommended land dimensions for a typical chip capacitor land patterns for PCBs
Recommended land dimensions for reflow-soldering(unit: mm)
Type
107
1.6
0.8
212
2.0
316
3.2
1.6
325
3.2
2.5
L
Size
W
51.25
A
B
C
0.8~1.0 0.8~1.2 1.8~2.5 1.8~2.5
0.6~0.8 0.8~1.2 1.0~1.5 1.0~1.5
0.6~0.8 0.9~1.6 1.2~2.0 1.8~3.2
Excess solder can affect the ability of chips to withstand mechanical stresses. Therefore, please take proper precautions when designing land-patterns.
(2)Examples of good and bad solder application
Items
Not recommended
Recommended
Mixed mounting
of SMD and leaded
components
Component
placement close to the
chassis
Electrode pattern
Technical
considerations
Hand-soldering of
leaded components
near mounted
components
Horizontal component
placement
◆Pattern configuration(s Capacitor layout on panelized [breakaway] PC boards)
1-1. The following are examples of good and bad capacitor layout; SMD capacitors should be located to minimize any possible mechanical stresses from board warp or deflection.
Items
Not recommended
Recommended
Deflection of the board
1-2. To layout the capacitors for the breakaway PC board, it should be noted that the amount of mechanical stresses given will vary depending on capacitor
layout. The example below shows recommendations for better design.
1-3.When breaking PC boards along their perforations, the amount of mechanical stress on the capacitors can vary according to the method used. The
following methods are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, any ideal SMD capacitor
layout must also consider the PCB splitting procedure.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc09_prec_e-01
mlcc09_prec-P1
■ PRECAUTIONS
3.Soldering
◆Selection of Flux
1.Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
(1)Flux used should be with less than or equal to 0.1 wt%(equivelent to chroline)of halogenated content. Flux having a strong acidity content should not
be applied.
(2)When soldering capacitors on the board, the amount of flux applied should be controlled at the optimum level.
(3)
When using water-soluble flux, special care should be taken to properly clean the boards.
Precautions
◆Soldering
1.Temperature, time, amount of solder, etc. are specified in accordance with the following recommended conditions.
Sn-Zn solder paste can affect MLCC reliability performance.
Please contact us prior to usage.
◆Selection of Flux
1-1. When too much halogenated substance(Chlorine, etc.)content is used to activate the flux, or highly acidic flux is used, an excessive amount of
residue after soldering may lead to corrosion of the terminal electrodes or degradation of insulation resistance on the surface of the capacitors.
1-2. Flux is used to increase solderability in flow soldering, but if too much is applied, a large amount of flux gas may be emitted and may detrimentally
affect solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved by water content in the air, the residue on the surface of capacitors in high humidity
conditions may cause a degradation of insulation resistance and therefore affect the reliability of the components. The cleaning methods and the
capability of the machines used should also be considered carefully when selecting water-soluble flux.
◆Soldering
1-1.Preheating when soldering
Heating: Ceramic chip components should be preheated to within 100 to 130℃ of the soldering.
Cooling: The temperature difference between the components and cleaning process should not be greater than 100℃.
Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling. Therefore, the soldering
process must be conducted with great care so as to prevent malfunction of the components due to excessive thermal shock.
【Recommended conditions for soldering】
【Recommended conditions for Pd Free soldering】
[Reflow soldering]
Temperature profile
Technical
considerations
Temperature(℃)
(Pb free soldering)
300
Peak 260℃ max
10 sec max
200
100
0
Gradually
cooling
Preheating
150℃
60 sec min
Heating above 230℃
40 sec max
※Ceramic chip components should be preheated to
within 100 to 130℃ of the soldering.
※Assured to be reflow soldering for 2 times.
Caution
①The ideal condition is to have solder mass(fillet)controlled to 1/2 to 1/3 of the thickness of the capacitor, as shown below:
Capacitor
Solder
PC board
②Because excessive dwell times can detrimentally affect solderability, soldering duration should be kept as close to recommended times as
possible.
*This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc09_prec_e-01
mlcc09_prec-P2
相关型号:
JMK042BJ223C
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products.
TAIYO YUDEN
JMK042BJ332C
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products.
TAIYO YUDEN
JMK042BJ332KC
Ceramic Capacitor, Multilayer, Ceramic, 6.3V, 10% +Tol, 10% -Tol, X5R, -/+15ppm/Cel TC, 0.0033uF, 01005,
TAIYO YUDEN
JMK042BJ472C
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products.
TAIYO YUDEN
©2020 ICPDF网 联系我们和版权申明